All-In-Wonder 128 - AGP, 32M

32M paměti, integrovaný ATi TV Tuner, TV vstup i výstup.


Core: ATI Rage 128 Pro 104/120MHz 128bit Memory: 32MB SDR 120/140MHz 64bit
Year: 2000 Bus: AGP 4x Made: 250nm
Pixel pipelines: 2 TMU per pipeline: 1
Vertex shaders: not supported Pixel Shaders: not supported DirectX: 6.0
Memory bandwith: 2270 MB/s
Pixel write speed: 240 MPixel/s Texel write speed: 240 MTexel/s

Existovaly i verze pouze s 16MB VRAM.

01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS (prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Rage 128 Pro AIW AGP
        Flags: bus master, stepping, 66MHz, medium devsel, latency 32, IRQ 10
        Memory at d8000000 (32-bit, prefetchable) [size=64M]
        I/O ports at c000 [size=256]
        Memory at dd000000 (32-bit, non-prefetchable) [size=16K]
        [virtual] Expansion ROM at dc000000 [disabled] [size=128K]
        Capabilities: [50] AGP version 2.0
        Capabilities: [5c] Power Management version 2

v X RH6.2 EN pomocí xrage.rpm z distribuce SUSE
v OpenSuse 10.3 pomocí upraveného r128 od Stanislava Brabce - mně, jako amatérovi, stačil tento odkaz: http://www.abclinuxu.cz/poradna/linux/show/131513

TV tuner se mi nepodařilo rozjet ani s projektem Gatos

Aktualizace 8.9.2007
V Mandrivalinuxu 2007.1, X.org 7.2

$ glxgears
libGL warning: 3D driver claims to not support visual 0x4b
3274 frames in 5.0 seconds = 654.634 FPS
3278 frames in 5.0 seconds = 655.551 FPS

Po upravení xorg.conf na:

Section "Device"
    Identifier "device1"
    VendorName "ATI Technologies Inc"
    BoardName "ATI Mach / Rage-based cards"
    Driver "ati"
    VideoRam 32768
    Option "DPMS"
    Option "XaaNoOffscreenPixmaps" "1"
    Option "EnablePageFlip" "true"
    Option "AGPMode" "4"

$ glxgears
libGL warning: 3D driver claims to not support visual 0x4b
5030 frames in 5.0 seconds = 1005.817 FPS
5023 frames in 5.0 seconds = 1004.561 FPS

3D desktop se mi zprovoznit nepodařilo ani TV tuner.
TV tuner fungoval v Mandrake 9.2 s ovladačemi Gatos.
Pokud někdo dosáhl lepších výsledků, prosím napište zde konfiguraci.