Matrox Millennium (PCI)

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

PCI, 2MB, SVGA

Identifikace pod Linuxem

VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 1).

Postup zprovoznění pod Linuxem

Framebuffer
Zakompilovat do jadra podporu pro framebuffer
Nasledujici polozky zatrhnout v menuconfig pri kompilaci.


Code maturity level options  --->
        Prompt for development and/or incomplete code/drivers


Frame-buffer support  --->
        [*] Support for frame buffer devices (EXPERIMENTAL)
        [*]   VESA VGA graphics console
        (*)   Matrox acceleration (EXPERIMENTAL)
        (M)     Matrox /proc interface
        [*]   Support only 8 pixels wide fonts


2) Nakonfigurovat /etc/lilo.conf


Graficke rezimy ktere karta podporuje, zadava se ta druha tabulka (dekaciky) privni jsem uved kdych udelal krpu.


bpp | 640x400  640x480  768x576  800x600  960x720
----+--------------------------------------------
  4 |            0x12             0x102
  8 |  0x100    0x101    0x180    0x103    0x188
 15 |           0x110    0x181    0x113    0x189
 16 |           0x111    0x182    0x114    0x18A
 24 |           0x1B2    0x184    0x1B5    0x18C
 32 |           0x112    0x183    0x115    0x18B
================================================
  4 |              17               258
  8 |    256      257      384      259      392
 15 |             272      385      275      393
 16 |             273      386      276      394
 24 |             434      389      437      396
 32 |             274      387      277      395


append = "video=matrox:vesa:REZIM" 
timeout = 120
default=Linux 


image = /boot/bzImage-old
  root = /dev/sda1
  label = Linux-old
  read-only


image = /boot/bzImage
  root = /dev/sda1
  label = Linux
  read-only


To je cast meho lilo.conf. Jede o to aby obsahoval polozku append se zvolenym rezimem.
Spustit lilo, aby konfigurace aktualizovala.


3)Nastavení X-Windows /etc/X11/XF86Config


Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"
    VideoRam    2048
EndSection


Section "Device"
      Identifier  "Card0"
      Driver      "mga"
      BoardName   "MGA 2064W [Millennium]"
      BusID       "PCI:0:11:0"       (Bus 0,device  11, function  0)
EndSection


Vybrat si na jakem ovladaci budete spoustet X-server.

Poznámka

Tot vse.

p.forty