Adaptec AIC-7890/1

80.0 Mbyte/sec, Ultra2 SCSI

Adaptec AIC7xxx driver version: 5.1.31/3.2.4
Compile Options:
TCQ Enabled By Default : Enabled
AIC7XXX_PROC_STATS : Enabled
AIC7XXX_RESET_DELAY : 5

Adapter Configuration:
SCSI Adapter: Adaptec AIC-7890/1 Ultra2 SCSI host adapter
Ultra-2 LVD/SE Wide Controller at PCI 0/6/0
PCI MMAPed I/O Base: 0xe1800000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 5
SCBs: Active 0, Max Active 16,
Allocated 30, HW 32, Page 255
Interrupts: 302709
BIOS Control Word: 0x18a6
Adapter Control Word: 0x1c5e
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0003
Ordered Queue Tag Flags: 0x0003
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Actual queue depth per device for aic7xxx host instance 0:
{8,8,1,1,1,1,1,1,1,1,1,1,1,1,1,1}

Bez problemu, zvlada ho standartni jadro u Debianu 2.2.