AHA2940,U,AU,UW

SCSI radic PCI s vlastnim BIOSem - lze z nej bootovat (i Linux) Adaptec -
zadne problemy za provozu

---

Jednokanalovy radic SCSI Narrow/Wide, Normal/Fast/Ultra

Adaptec AIC7xxx driver version: 5.1.31/3.2.4
Compile Options:
TCQ Enabled By Default : Disabled
AIC7XXX_PROC_STATS : Disabled
AIC7XXX_RESET_DELAY : 5

Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
Ultra Wide Controller at PCI 0/20/0
PCI MMAPed I/O Base: 0xf3fff000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 14
SCBs: Active 0, Max Active 1,
Allocated 15, HW 16, Page 255
Interrupts: 61743
BIOS Control Word: 0x1894
Adapter Control Word: 0x00cd
Extended Translation: Enabled
Disconnect Enable Flags: 0xfefe
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}

Nainstalovat Linux
za provozu nevim, nekdo snad doplni

---

Radic (chip) je rozeznavan automaticky pri instalaci.
V aninstalovanem systemu je mozne pridat podporu pro tento radic (a radice zalozene an chipu AIC7880) zavedenim modulu aic7xxx.o

---

Pod RedHat 6.2 naprosto OK.
Pri instalaci v SuSE 7.0 je nutne provest celou instalaci v grafickem rezimu, nebo bootovat primo do textoveho rezimu YaST2 (stisknutim Ctrl pri bootu). YaST1 ma problem s detekci tohoto radice.

Drahy, ale kvalitni a bezproblemovy

---

Je to drahe ale bez rizika. Osobne mam na integrovanem radici zaveseny tri disky, CD-ROM a CD-R