Axago ECU-23

• 2×USB 3.0
• řadič NEC PD720200
• konektor pro externí napájení; dodává se s adaptérem a kabelem pro napájení přes USB
• ExpressCard
• trčí ze slotu

$ lsusb
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

$ dmesg
[40898.664174] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[40898.664232] pciehp 0000:00:1c.3:pcie04: slot(3): Link Up event
[40898.664413] pciehp 0000:00:1c.3:pcie04: Link Up event ignored on slot(3): already powering on
[40898.784165] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[40898.784214] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[40898.784436] pci 0000:05:00.0: PME# supported from D0 D3hot
[40898.784674] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0001fff 64bit]
[40898.784703] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[40898.784708] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[40898.784716] pcieport 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[40898.784722] pcieport 0000:00:1c.3:   bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[40898.784753] pci 0000:05:00.0: enabling device (0000 -> 0002)
[40898.785039] xhci_hcd 0000:05:00.0: xHCI Host Controller
[40898.785053] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[40898.786304] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[40898.786308] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[40898.786311] usb usb9: Product: xHCI Host Controller
[40898.786314] usb usb9: Manufacturer: Linux 3.19.0-49-generic xhci-hcd
[40898.786317] usb usb9: SerialNumber: 0000:05:00.0
[40898.786568] hub 9-0:1.0: USB hub found
[40898.786588] hub 9-0:1.0: 2 ports detected
[40898.786773] xhci_hcd 0000:05:00.0: xHCI Host Controller
[40898.786780] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[40898.788604] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[40898.788636] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[40898.788639] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[40898.788641] usb usb10: Product: xHCI Host Controller
[40898.788644] usb usb10: Manufacturer: Linux 3.19.0-49-generic xhci-hcd
[40898.788647] usb usb10: SerialNumber: 0000:05:00.0
[40898.791868] hub 10-0:1.0: USB hub found
[40898.791890] hub 10-0:1.0: 2 ports detected

Zapojit a používat. K použití externího disku (i 2,5palcového) je potřeba externí napájení.

Uvedený stav je k jádru 3.19 z Ubuntu 15.04. Když jsem řadič dříve zkoušel s jádrem 3.11 (Ubuntu 13.10), bylo potřeba manipulovat s firmwarem (dostupným pouze v ovladačích pro MS Windows).