Edimax EU-4206 10/100 USB2.0

$ lsusb
Bus 001 Device 002: ID 9710:7830 MosChip Semiconductor

V Ubuntu 7.04 plug'n'play.

V Gentoo (jádro 2.6.22) povolit volbu jádra

Device Drivers ->  Network device support-> USB Network Adapters->Multi-purpose USB Networking Framework (*) - MosChip MCS7830 based Eth adapters (M)

Při připojení dmesg hlásil:

usb 4-3: device not accepting address 10, error -71
hub 4-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?

Zařízení nedetekováno, bylo třeba vypnout podporu USB 2.0:

rmmod ehci_hcd

Pod Ubuntu 8.04 Hardy x86 funkční:

$ dmesg
[11855.364647] usb 2-4: new high speed USB device using ehci_hcd and address 4
[11855.501184] usb 2-4: configuration #1 chosen from 1 choice
[11855.573670] usb 2-4: applying rev.C fixup
[11855.585710] usb 2-4: applying rev.C fixup
[11855.593457] eth1: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:02.1-4, MOSCHIP 7830 usb-NET adapter, 00:0a:0a:bc:06:9c