Portál AbcLinuxu, 1. listopadu 2025 19:45
Čipset: RaLink RT2860
Normy: 802.11abgn (2.4 i 5 GHz pásma)
03:06.0 Network controller: RaLink RT2800 802.11n PCI
Jádro 2.6.31 a novější a firmware od RaLinku. Plug&play – zcela bez problému. Samolepky a nápisy "Run CD First!" všude na všech obalech jsou ftipné 
# iw list
Wiphy phy0
Band 1:
Capabilities: 0x2f2
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 2-streams
Max AMSDU length: 7935 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT RX MCS rate indexes supported: 0-15, 32
TX unequal modulation not supported
HT TX Max spatial streams: 2
HT TX MCS rate indexes supported may differ
Frequencies:
* 2412 MHz [1] (0.0 dBm)
* 2417 MHz [2] (0.0 dBm)
* 2422 MHz [3] (0.0 dBm)
* 2427 MHz [4] (0.0 dBm)
* 2432 MHz [5] (0.0 dBm)
* 2437 MHz [6] (0.0 dBm)
* 2442 MHz [7] (0.0 dBm)
* 2447 MHz [8] (0.0 dBm)
* 2452 MHz [9] (0.0 dBm)
* 2457 MHz [10] (0.0 dBm)
* 2462 MHz [11] (0.0 dBm)
* 2467 MHz [12] (0.0 dBm) (passive scanning, no IBSS)
* 2472 MHz [13] (0.0 dBm) (passive scanning, no IBSS)
* 2484 MHz [14] (0.0 dBm) (passive scanning, no IBSS)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x2f2
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 2-streams
Max AMSDU length: 7935 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT RX MCS rate indexes supported: 0-15, 32
TX unequal modulation not supported
HT TX Max spatial streams: 2
HT TX MCS rate indexes supported may differ
Frequencies:
* 5180 MHz [36] (0.0 dBm) (passive scanning, no IBSS)
* 5190 MHz [38] (0.0 dBm) (passive scanning, no IBSS)
* 5200 MHz [40] (0.0 dBm) (passive scanning, no IBSS)
* 5220 MHz [44] (0.0 dBm) (passive scanning, no IBSS)
* 5230 MHz [46] (0.0 dBm) (passive scanning, no IBSS)
* 5240 MHz [48] (0.0 dBm) (passive scanning, no IBSS)
* 5260 MHz [52] (disabled)
* 5270 MHz [54] (disabled)
* 5280 MHz [56] (disabled)
* 5300 MHz [60] (disabled)
* 5310 MHz [62] (disabled)
* 5320 MHz [64] (disabled)
* 5500 MHz [100] (disabled)
* 5510 MHz [102] (disabled)
* 5520 MHz [104] (disabled)
* 5540 MHz [108] (disabled)
* 5550 MHz [110] (disabled)
* 5560 MHz [112] (disabled)
* 5580 MHz [116] (disabled)
* 5590 MHz [118] (disabled)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5630 MHz [126] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (disabled)
* 5670 MHz [134] (disabled)
* 5680 MHz [136] (disabled)
* 5700 MHz [140] (disabled)
* 5745 MHz [149] (0.0 dBm) (passive scanning, no IBSS)
* 5755 MHz [151] (0.0 dBm) (passive scanning, no IBSS)
* 5765 MHz [153] (0.0 dBm) (passive scanning, no IBSS)
* 5785 MHz [157] (0.0 dBm) (passive scanning, no IBSS)
* 5795 MHz [159] (0.0 dBm) (passive scanning, no IBSS)
* 5805 MHz [161] (0.0 dBm) (passive scanning, no IBSS)
* 5825 MHz [165] (0.0 dBm) (passive scanning, no IBSS)
* 5835 MHz [167] (disabled)
* 5845 MHz [169] (disabled)
* 5855 MHz [171] (disabled)
* 5865 MHz [173] (disabled)
* 4920 MHz [-16] (disabled)
* 4940 MHz [-12] (disabled)
* 4960 MHz [-8] (disabled)
* 4980 MHz [-4] (disabled)
* 6040 MHz [208] (disabled)
* 6060 MHz [212] (disabled)
* 6080 MHz [216] (disabled)
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 4
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* new_mpath
* set_mesh_params
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* Unknown command (68)
* Unknown command (55)
* Unknown command (57)
* Unknown command (59)
* Unknown command (67)
* set_wiphy_netns
* Unknown command (65)
* Unknown command (66)
* Unknown command (84)
* Unknown command (87)
* Unknown command (85)
* connect
* disconnect
Dokument vytvořil: |🇵🇸, 1.5.2011 00:47 | Poslední úprava: Josef Kufner, 26.7.2012 12:16 | Historie změn | Zobrazeno: 748×
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.