Acer WLAN-G-RU2

• Wireless Access Point, Broadband Router
• 4 portový 10/100TX switch + 1 WAN Port
• 54Mpbs (802.11b/g)
• Firewall, NAT, WEP 128bit
• konfigurace pomocí webového prohlížeče

$ nmap -v -sS -O 192.168.62.1 
Starting nmap 3.83.DC13 ( http://www.insecure.org/nmap/ ) at 2006-01-04 12:29 CET
Initiating ARP Ping Scan against 192.168.62.1 [1 port] at 12:29
The ARP Ping Scan took 0.07s to scan 1 total hosts.
Initiating SYN Stealth Scan against 192.168.62.1 [1667 ports] at 12:30
Discovered open port 80/tcp on 192.168.62.1
Discovered open port 8080/tcp on 192.168.62.1
The SYN Stealth Scan took 0.86s to scan 1667 total ports.
For OSScan assuming port 80 is open, 1 is closed, and neither are firewalled
Host 192.168.62.1 appears to be up ... good.
Interesting ports on 192.168.62.1:
(The 1665 ports scanned but not shown below are in state: closed)
PORT     STATE SERVICE
80/tcp   open  http
8080/tcp open  http-proxy
MAC Address: 00:11:E2:01:3B:D7 (Hua Jung Components Co.)
Device type: bridge
Running: Linksys embedded
OS details: Linksys WGA54G Wireless Game Adapter (bridge)
TCP Sequence Prediction: Class=trivial time dependency
                         Difficulty=1 (Trivial joke)
IPID Sequence Generation: Incremental

Nmap finished: 1 IP address (1 host up) scanned in 23.793 seconds
               Raw packets sent: 1684 (68.2KB) | Rcvd: 1682 (77.4KB

Jde o síťový router s podporou Wi-Fi, takže připojit kabely RJ45, nastavit na Linuxu stejnou síť:

ifconfig eth0:1 192.168.62.10 broadcast 192.168.255.255 netmask 255.255.0.0 up

Připojit se prohlížečem na http://192.168.62.1 (admin heslo 1234) a nastavit dle požadavků.

V případě obdobného routeru SMC WBR14-G jsem napsal, že jde o strašný křáp. Musím bohužel konstatovat, že toto je ještě větší křáp. Přinesl jej kolega s tím, že nefunguje Wi-Fi. Ani po půl dne experimentování se Wi-Fi nepovedlo oživit.