Archer T3U Plus

IEEE 802.11b/g/n 2.4GHz
IEEE 802.11a/n/ac 5GHz

iw list
Wiphy phy3
	wiphy index: 3
	max # scan SSIDs: 9
	max scan IEs length: 2304 bytes
	max # sched scan SSIDs: 0
	max # match sets: 0
	max # scan plans: 1
	max scan plan interval: -1
	max scan plan iterations: 0
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP-128 (00-0f-ac:4)
		* CMAC (00-0f-ac:6)
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * monitor
		 * P2P-client
		 * P2P-GO
	Band 1:
		Capabilities: 0x1963
			RX LDPC
			HT20/HT40
			Static SM Power Save
			RX HT20 SGI
			RX HT40 SGI
			RX STBC 1-stream
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT Max RX data rate: 300 Mbps
		HT TX/RX MCS rate indexes supported: 0-15
		Bitrates (non-HT):
			* 1.0 Mbps
			* 2.0 Mbps
			* 5.5 Mbps
			* 11.0 Mbps
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 2412 MHz [1] (30.0 dBm)
			* 2417 MHz [2] (30.0 dBm)
			* 2422 MHz [3] (30.0 dBm)
			* 2427 MHz [4] (30.0 dBm)
			* 2432 MHz [5] (30.0 dBm)
			* 2437 MHz [6] (30.0 dBm)
			* 2442 MHz [7] (30.0 dBm)
			* 2447 MHz [8] (30.0 dBm)
			* 2452 MHz [9] (30.0 dBm)
			* 2457 MHz [10] (30.0 dBm)
			* 2462 MHz [11] (30.0 dBm)
			* 2467 MHz [12] (30.0 dBm) (no IR)
			* 2472 MHz [13] (30.0 dBm) (no IR)
			* 2484 MHz [14] (disabled)
	Band 2:
		Capabilities: 0x1863
			RX LDPC
			HT20/HT40
			Static SM Power Save
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT Max RX data rate: 300 Mbps
		HT TX/RX MCS rate indexes supported: 0-15
		VHT Capabilities (0x03d071b2):
			Max MPDU length: 11454
			Supported Channel Width: neither 160 nor 80+80
			RX LDPC
			short GI (80 MHz)
			TX STBC
			SU Beamformee
			MU Beamformee
			+HTC-VHT
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 867 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 867 Mbps
		Bitrates (non-HT):
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 5180 MHz [36] (30.0 dBm)
			* 5200 MHz [40] (30.0 dBm)
			* 5220 MHz [44] (30.0 dBm)
			* 5240 MHz [48] (30.0 dBm)
			* 5260 MHz [52] (30.0 dBm) (radar detection)
			* 5280 MHz [56] (30.0 dBm) (radar detection)
			* 5300 MHz [60] (30.0 dBm) (radar detection)
			* 5320 MHz [64] (30.0 dBm) (radar detection)
			* 5500 MHz [100] (30.0 dBm) (radar detection)
			* 5520 MHz [104] (30.0 dBm) (radar detection)
			* 5540 MHz [108] (30.0 dBm) (radar detection)
			* 5560 MHz [112] (30.0 dBm) (radar detection)
			* 5580 MHz [116] (30.0 dBm) (radar detection)
			* 5600 MHz [120] (30.0 dBm) (radar detection)
			* 5620 MHz [124] (30.0 dBm) (radar detection)
			* 5640 MHz [128] (30.0 dBm) (radar detection)
			* 5660 MHz [132] (30.0 dBm) (radar detection)
			* 5680 MHz [136] (30.0 dBm) (radar detection)
			* 5700 MHz [140] (30.0 dBm) (radar detection)
			* 5720 MHz [144] (disabled)
			* 5745 MHz [149] (disabled)
			* 5765 MHz [153] (disabled)
			* 5785 MHz [157] (disabled)
			* 5805 MHz [161] (disabled)
			* 5825 MHz [165] (disabled)
			* 5845 MHz [169] (disabled)
			* 5865 MHz [173] (disabled)
			* 5885 MHz [177] (disabled)
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * new_station
		 * set_bss
		 * join_ibss
		 * set_pmksa
		 * del_pmksa
		 * flush_pmksa
		 * remain_on_channel
		 * frame
		 * set_channel
		 * connect
		 * disconnect
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0xd0
		 * managed: 0x40 0xb0 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
	WoWLAN support:
		 * wake up on anything (device continues operating normally)
	software interface modes (can always be added):
		 * monitor
	interface combinations are not supported
	Device supports SAE with AUTHENTICATE command
	Device supports scan flush.
	Supported extended features:

lsusb -s 003
Bus 002 Device 003: ID 2357:0138 TP-Link 802.11ac NIC

dva různý ovladače z githubu fungují

V debianu s jádrem 5.9.0-5 zprovozěno ovladačem 88x2bu https://github.com/morrownr/88x2bu

+- přepis jejich návodu

sudo apt update
sudo apt install linux-headers-$(uname -r) build-essential dkms git
git clone https://github.com/morrownr/88x2bu.git
cd 88x2bu

# i když je ve složšce makefile tak příkaz 'make' si zavolá skriptík sám
sudo ./install-driver.sh

# před restartem je možný jakoby poeditovat různý možnosti v /etc/modprobe.d/88x2bu.conf
sudo ./edit-options.sh

# nakonec restartovat
sudo reboot

projistotu druhej možnej existující fungující ovladač https://github.com/RinCat/RTL88x2BU-Linux-Driver

git clone https://github.com/RinCat/RTL88x2BU-Linux-Driver.git
cd RTL88x2BU-Linux-Driver
make
sudo make install

ale ten první driver umožňuje ovládání LED světýlka. Zní to jako pitomej detail ale pro dost lidí si myslim že to muže bejt děsně důležitý. Uvnitř toho modulku nepravidelně bliká zelená status ledka když modul komunikuje nóó a po chvilce používání mi to přišlo děsně votravný a rušivý a furt ten modulek na sebe jakoby přitahoval pozornost. V 88x2bu.conf mužeme nastavit parametr rtw_led_ctrl na nulu když chcem aby ledka nesvítila vubec, na 1 aby si s ní blikal modul sám a na 2 aby svítila furt.

stránka výrobce hele

Linux neni výrobcem oficiálně podporován hele. Na krabičce je jenom logo windows™ (není tam ani jablíčko ani tučňáček) i když pod macOS by měl podle informací na stránce výrobce taky fungovat.

Má cca 16 cm dlouhou neodendávací anténku kterou lze sklápět a natáčet do stran. V tom hejbacím kloubu sou vidět dva drátky jak vedou do anténky (černej a bílej), takže trošičku šikovnější člověk by si asi moh anténku rozebrat/uskřípnout a naletovat tam nějakej svuj konektor. nevim.