AVerTV DVB-T Volar

• 75O TV Antenna Input
• USB2.0 Output
• bandwidth: 6/7/8 MHz

usb 1-1: new high speed USB device using ehci_hcd and address 5
usb 1-1: configuration #1 chosen from 1 choice
dvb-usb: found a 'AVerMedia AVerTV DVB-T Volar' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'AVerMedia AVerTV DVB-T Volar' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia AVerTV DVB-T Volar).
DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: AVerMedia AVerTV DVB-T Volar successfully initialized and connected.

1. Nastavíme jádro:

   CONFIG_DVB=y
   CONFIG_DVB_CORE=m
   CONFIG_DVB_USB_DIB0700=m
   CONFIG_DVB_DIB3000MC=m
   CONFIG_DVB_DIB7000M=m
   CONFIG_DVB_DIB7000P=m
   CONFIG_DVB_TUNER_MT2060=m
   

2. zkompilujeme
3. firmware zkopírujeme do adresáře /lib/firmware
4. apt-get install dvb-utils
5. do channels.conf uložíme např. pro Brno následující obsah:

   CT SPORT:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1025:1041:4
   CRo1-Radiozurnal    :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:4113:10
   CRo2-Praha          :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:4369:11
   CRo3-Vltava         :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:4625:12
   CRo4-Radio Wave     :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:4881:13
   CRo D-dur           :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:5137:14
   CRo Leonardo        :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:5393:15
   CRo Radio Cesko     :626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:5649:16
   Aplikace MHP:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:1000
   CT 1:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:257:273:1
   CT 2:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:513:529:2
   CT 24:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:785:3
   NOVA:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1281:1297:5
   

6. zkopírujeme si channels.conf pro pozdější použití do ~/.xine/channels.conf
7. rebootujeme
8. gxine dvb://