Genius TVGo DVB-T03 (HW z 2010)

DVB-T USB zarizeni, s vestavenym konektorem na antenu.

# lsusb
Bus 002 Device 012: ID 1b80:d393 Afatech 

# dmesg
[ 9617.572038] usb 2-10: new high speed USB device using ehci_hcd and address 13
[ 9617.714066] usb 2-10: New USB device found, idVendor=1b80, idProduct=d393
[ 9617.714075] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9617.714081] usb 2-10: Product: usbtv
[ 9617.714086] usb 2-10: Manufacturer: realtek
[ 9617.714309] usb 2-10: configuration #1 chosen from 1 choice

po instalaci ovladace:

# dmesg
[  393.064044] usb 2-10: new high speed USB device using ehci_hcd and address 5
[  393.206060] usb 2-10: New USB device found, idVendor=1b80, idProduct=d393
[  393.206069] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  393.206075] usb 2-10: Product: usbtv
[  393.206079] usb 2-10: Manufacturer: realtek
[  393.206303] usb 2-10: configuration #1 chosen from 1 choice
[  393.372576] dvb-usb: found a 'USB DVB-T Device' in warm state.
[  393.372587] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  393.374242] DVB: registering new adapter (USB DVB-T Device)
[  393.374531] DVB: registering adapter 1 frontend 0 (Realtek RTL2832 DVB-T  RTL2836 DTMB)...
[  393.374568] dvb-usb: USB DVB-T Device successfully initialized and connected.
[  393.374590] usbcore: registered new interface driver dvb_usb_rtl2832u

Debian:

cat /etc/debian_version 
5.0.6

Jadro:

ii  linux-headers-2.6.32-bpo.5-amd64     2.6.32-23~bpo50+1                   Header files for Linux 2.6.32-bpo.5-amd64
ii  linux-headers-2.6.32-bpo.5-common    2.6.32-23~bpo50+1                   Common header files for Linux 2.6.32-bpo.5
ii  linux-image-2.6.32-bpo.5-amd64       2.6.32-23~bpo50+1                   Linux 2.6.32 for 64-bit PCs

Nejdrive stahnout ovladac 091207_RTL2832U_LINUX_Ver1.4.2.rar

(Uz je k maní novejsi ovladac ale zatim jsem se nedostal k jeho otestovani... pokud mne nekdo predbehne dejte sem vedet o svych uspesich! Stahovat lze treba odtud: 20101102_linux_install_package-Dongle.rar)

Pak rozbalit (je treba unrar a kernel-headers, pripadne sources).
Nasledne pokracovat dle README.
V baliku je ovladac jeste jednou zabalen v tar.bzipu ten se rozbali a pak standardni

make clean 
make 
make install (jako root)

+ restart.
Dale je treba ulozit firmware nejlepe do /lib/firmware/dvb-usb-af9015.fw.

Ovladac je funkcni ve smyslu jde se na nem divat na TV nic jineho jsem s nim zatim nezkousel.
Jako vsechny takto mala zarizeni je VELMI citlivy na silu signalu, dokonce jeste vice nez napriklad AVerTV DVB-T Volar X
Preklad se zdaril bez obtizi na Debian Lenny s 2.6.32-bpo-amd64

dle lsusb se jedna:
1b80 - Afatech, d393 - DVB-T receiver [RTL2832U]