Hauppauge WinTV-HVR-850

Duální analogový a digitální (ATSC) USB tuner

Funguje pouze s USB 2.0

Digitální část bez problémů (Kubuntu 9.04), analogová podpora je ve v4l-dvb a brzy bude i v jádře.

http://www.hauppauge.com/site/products/data_hvr850.html

lsusb
Bus 002 Device 005: ID 2040:7240 Hauppauge

au0828: i2c bus registered
tveeprom 6-0050: Hauppauge model 72301, rev B3F0, serial# 6165520
tveeprom 6-0050: MAC address is 00-0D-FE-5E-14-10
tveeprom 6-0050: tuner model is Xceive XC5000 (idx 150, type 4)
tveeprom 6-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 6-0050: audio processor is AU8522 (idx 44)
tveeprom 6-0050: decoder processor is AU8522 (idx 42)
tveeprom 6-0050: has no radio, has IR receiver, has no IR transmitter
hauppauge_eeprom: hauppauge eeprom: model=72301
xc5000 6-0061: creating new instance
xc5000: Successfully identified at address 0x61
xc5000: Firmware has not been loaded previously
DVB: registering new adapter (au0828)
DVB: registering adapter 0 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)...
Registered device AU0828 [Hauppauge HVR850]
xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)...
i2c-adapter i2c-6: firmware: requesting dvb-fe-xc5000-1.1.fw
xc5000: firmware read 12332 bytes.
xc5000: firmware upload

www.linuxtv.org

 wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
 wget http://www.steventoth.net/linux/xc5000/extract.sh
 sh extract.sh
 cp dvb-fe-xc5000-1.1.fw /lib/firmware

Funguje dobře i na pokojovou anténu.