Pinnacle PCTV Dual DVB-T 2000e

Interface: USB 2.0 2 DVB-T tuners Frequency range 45.75.. 863.25 MHz (VHF and UHF) 2 DVB-T COFDM Demodulators Supported modulations 16, 64 QAM, QPSK Bandwidths 6, 7, 8 MHz Antenna inputs: 1 IEC connector 1 MCX connector (adaptor to IEC included) USB bus powered (no power supply required) Enclosure dimensions: 82(L) x 31(W) x 15(H)mm

lsusb

Bus 001 Device 002: ID 2304:022c Pinnacle Systems, Inc. [hex]

dmesg

Jul  7 19:30:29 l2 kernel: usb 8-5: new high speed USB device using ehci_hcd and address 3
Jul  7 19:30:29 l2 kernel: usb 8-5: configuration #1 chosen from 1 choice
Jul  7 19:30:29 l2 kernel: dib0700: loaded with support for 3 different device-types
Jul  7 19:30:29 l2 kernel: dvb-usb: found a 'Pinnacle PCTV 2000e' in cold state, will try to load a firmware
Jul  7 19:30:29 l2 kernel: dvb-usb: did not find the firmware file. (dvb-usb-dib0700-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
Jul  7 19:30:29 l2 kernel: usbcore: registered new interface driver dvb_usb_dib0700
Jul  7 19:31:38 l2 kernel: usb 8-5: USB disconnect, address 3
Jul  7 19:31:41 l2 kernel: usb 8-5: new high speed USB device using ehci_hcd and address 4
Jul  7 19:31:41 l2 kernel: usb 8-5: configuration #1 chosen from 1 choice
Jul  7 19:31:41 l2 kernel: dvb-usb: found a 'Pinnacle PCTV 2000e' in cold state, will try to load a firmware
Jul  7 19:31:41 l2 kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
Jul  7 19:31:41 l2 kernel: dib0700: firmware started successfully.
Jul  7 19:31:41 l2 kernel: dvb-usb: found a 'Pinnacle PCTV 2000e' in warm state.
Jul  7 19:31:41 l2 kernel: i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Jul  7 19:31:41 l2 kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jul  7 19:31:41 l2 kernel: DVB: registering new adapter (Pinnacle PCTV 2000e)
.....
Jul  7 19:31:42 l2 kernel: i2c-adapter i2c-5: SMBus Quick command not supported, can't probe for chips
Jul  7 19:31:42 l2 kernel: DVB: registering frontend 0 (DiBcom 7000PC)...
Jul  7 19:31:42 l2 kernel: MT2266: successfully identified
Jul  7 19:31:42 l2 kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jul  7 19:31:42 l2 kernel: DVB: registering new adapter (Pinnacle PCTV 2000e)
Jul  7 19:31:42 l2 kernel: i2c-adapter i2c-6: SMBus Quick command not supported, can't probe for chips
Jul  7 19:31:42 l2 kernel: DVB: registering frontend 1 (DiBcom 7000PC)...
Jul  7 19:31:42 l2 kernel: MT2266: successfully identified
Jul  7 19:31:42 l2 kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input6
Jul  7 19:31:42 l2 kernel: dvb-usb: schedule remote query interval to 150 msecs.
Jul  7 19:31:42 l2 kernel: dvb-usb: Pinnacle PCTV 2000e successfully initialized and connected.

je treba stahnout aktualni v4l strom a patch, opatchovat a zkompilovat. dale je treba firmware umistit dvb-usb-dib0700-01.fw (lze vygooglit) do /lib/firmware

v /dev/dvb vzniknou dva adaptery, naladit program mi slo jenom pres adapter0, coz byl v mem pripade adapter, ktery ma antenu "do boku"