Portál AbcLinuxu, 13. června 2025 10:35
opensuse 11.2
uname -a Linux kernel 2.6.31.8-0.1-default #1 SMP 2009-12-15 23:55:40 +0100 i686 athlon i386 GNU/Linux
dmesg
[44272.724041] usb 1-4: new high speed USB device using ehci_hcd and address 9
[44272.856845] usb 1-4: New USB device found, idVendor=2304, idProduct=0229
[44272.856866] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[44272.856875] usb 1-4: Product: PCTV 2001e
[44272.856881] usb 1-4: Manufacturer: PINNACLE
[44272.856887] usb 1-4: SerialNumber: 12048190
[44272.857036] usb 1-4: configuration #1 chosen from 1 choice
[44272.858058] dvb-usb: found a 'Pinnacle PCTV Dual DVB-T Diversity Stick' in cold state, will try to load a firmware
[44272.858089] usb 1-4: firmware: requesting dvb-usb-dib0700-1.20.fw
[44273.015900] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[44273.226200] dib0700: firmware started successfully.
[44273.728041] dvb-usb: found a 'Pinnacle PCTV Dual DVB-T Diversity Stick' in warm state.
[44273.728190] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[44273.729168] DVB: registering new adapter (Pinnacle PCTV Dual DVB-T Diversity Stick)
[44273.949685] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[44274.119925] DiB0070: successfully identified
[44274.119947] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[44274.120314] DVB: registering new adapter (Pinnacle PCTV Dual DVB-T Diversity Stick)
[44274.276144] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
[44274.479927] DiB0070: successfully identified
[44274.480084] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.3/usb1/1-4/input/input10
[44274.480169] dvb-usb: schedule remote query interval to 50 msecs.
[44274.480180] dvb-usb: Pinnacle PCTV Dual DVB-T Diversity Stick successfully initialized and connected.
na modernom distre stačí predhodiť firmware dvb-usb-dib0700-1.20.fw (bez problémob na google) do /lib/firmware, zasunúť do USB a funguje to
vlc nemalo problém po vložení frekvencie s ničím, čo som potreboval
mplayer trhal video, aj keď zvuk bol v poriadku, dôvod som kôli fungujúcemu vlc nezisťoval
karta obsahuje 2(!) dvb-t tunery, ako aj 2 antény, nejde o hybrida analog/dvb-t
defaultne pracuje vlc s adapter0, takže po ručnej konfigurácii by nemal byť problém sledovať 2 programy súčasne atď..skúsim časom...
EDIT: funguje, normálne stači otvoriť nové okno vlc a ako zdroj dať adapter1drahší, ale funguje (po stiahnutí FW) takmer out-of-the-box, takže sa oplatilo priplatiť (cca 50€).
Dokument vytvořil: redyuri, 9.1.2010 22:45 | Poslední úprava: redyuri, 27.2.2011 15:09 | Historie změn | Zobrazeno: 1994×
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.