ASUS My Cinema-P7131 Hybrid

TV karta s podporou FM radia, TV analog PAL tuneru, DVB-T tuneru a vstupy pro nahravani jinych zdroju (kamera, video, atd). Dalkove ovladani, pasivni antena. HW encoder MPEG1/2. Audio konektor pro pripojeni zvuku do zakladni desky. PCI 2.2, low profile.

http://cz.asus.com/products.aspx?l1=18&l2=83&l3=252&l4=0&model=547&modelmenu=1

# lspci
00:0d.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

# lspci -n
00:0d.0 0480: 1131:7133 (rev d1)

# lspci -vn
00:0d.0 0480: 1131:7133 (rev d1)
        Subsystem: 1043:4876
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at ef004000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2

# lspci -v
00:0d.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
        Subsystem: ASUSTeK Computer Inc. Unknown device 4876
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at ef004000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2

# arecord -l
**** List of CAPTURE Hardware Devices ****
card 2: SAA7134 [SAA7134], device 0: SAA7134 PCM [SAA7134 PCM]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

# dmesg
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:0a:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7133[0]: found at 0000:0a:0d.0, rev: 209, irq: 18, latency: 32, mmio: 0xfcfff000
saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,autodetected]
saa7133[0]: board init: gpio is 0
input: saa7134 IR (ASUSTeK P7131 Hybri as /devices/pci0000:00/0000:00:13.1/0000:0a:0d.0/input/input7
saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 20 -- ok

Karta funguje relativne dobre (Ubuntu 7.10). Je ale treba sehnat firmaware, viz nize.
Neni problem naladit analogovou TV. Zvuk je fajn, ale funguje jen pravy kanal (pres analogovy kablik zapojeny do zakladni desky; stejny problem i ve Windows...). FM radio take nejak funguje, zase jen pravy kanal. Dalkove ovladani (IR) lze pouzit. Analogovy teletext nefunguje. Analogovy tuner ma dobrou citlivost (srovnavam se starsimi TV kartami postavenymi na BT848).
Naladim jen multiplex A. Multiplex B i C by jsem mel take naladit, ale povede se mi vyjimacne naladit Multiplex B (problem je v Linuxu, protoze kdyz jsem stejnou kartu vyzkousel v PC s WinXP, tak naladila ve stejne lokalite se stejnou antenou vsechny 3 multiplexy; v Linuxu naladi jen multiplex s nejsilnejsim signalem). Zvuk v DVB-T modu funguje dobre (oba kanaly).

Analogovy zvuk prenaseny digitalne primo z karty pres PCI sbernici je OK; stereo, oba kanaly.
(arecord -D hw:2,0 -r 32000 -c 2 -f S16_LE | aplay)

Ak to sposobuje A-V desynchronizaciu, vyskusat:

sox -r 32000 -w -t alsa hw:2,0 -t alsa hw:0,0

V případě, že se v logu kernelu (dmesg) objevují chyby tohoto druhu (což se objevovat budou, pokud chcete použít DVB-T):

tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: firmware upload failed

potřebujete stáhnout pro tuto kartu firmware. Bez toho se DVB-T bude tvářit, že funguje, ale nic nenaladíte. Pro získání a správné umístění firmware použijte následující postup (potřebujete k tomu mít v /usr/src/linux zdrojáky jádra):

cd /usr/src/linux/Documentation/dvb/
perl get_dvb_firmware tda10046
cp dvb-fe-tda10046.fw /lib/firmware/

http://www.linuxtv.org/wiki/index.php/Asus_My_Cinema-P7131_Hybrid

http://gentoo-wiki.com/HARDWARE_saa7134

Pre prehravania sa moze pouzit mplayer, funguje bez sox:

mplayer tv://se8 -tv driver=v4l2:input=0:width=720:height=576:adevice=hw.1,0:audiorate=32000:forceaudio:volume=100:alsa:immediatemode=0:amode=1

Testovane s Ubuntu 8.04, kernel 2.6.24-19-generic. Intel E2160. Funguje analog aj DVB-T, kaffeine, mplayer, tvtime, me-tv
Testovano s Ubuntu 7.10, kernel 2.6.22-24-generic. AMD Athlon XP1800+. FUNGUJE analog i DVB-T; prehravac Kafeine.
Testovano s Ubuntu 7.04, kernel 2.6.20-16-generic. AMD Athlon XP1800+. Funguje jen analog.
Testovano s FC7, kernel 2.6.22.4-65.fc7 a FC8, kernel 2.6.23.1-42.fc8. Funguje jen analog.
DVB-T FC6+V4L z atrpms OK, FC7 a F8 OK (Kaacz)
Testovano s Gentoo, kernel 2.6.23-gentoo-r1

Pod WindowsXP testovano s ProgDVB; Originalni SW dodany na CD s kartou vypada moc pekne, ale neni prilis funkcni. Na ProgDVB je zajimave, ze neni treba zadavat frekvence (jako v Linuxu), behem vyhledavani prosel 57 preddefinovanych frekvenci a nasel uplne vsechny programy. WOW.