Portál AbcLinuxu, 4. května 2025 14:13

ST Lab FM/TV7130

Podpora: kompletní
Ovladač: v jádře

Technické parametry

TV/FM tuner mono(FM stereo), normy PAL B/G a D/K
chip saa7130HL tuner TNF-9835-B/DFF

Identifikace pod Linuxem

/etc/sysconfig/hwconf:
class: CAPTURE
bus: PCI
detached: 0
driver: saa7134
desc: "Philips Semiconductors SAA7130 Video Broadcast Decoder"
vendorId: 1131
deviceId: 7130
subVendorId: 1131
subDeviceId: 203e
pciType: 1
pcidom:    0
pcibus:  0
pcidev:  8
pcifn:  0

dmesg:
saa7130/34: v4l2 driver version 0.2.12 loaded
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 10, latency: 32, mmio: 0xdfffbc00
saa7130[0]: subsystem: 1131:203e, board: LifeView FlyVIDEO2000 [card=3,insmod option]
saa7130[0]: board init: gpio is 4111ff
saa7130[0]: there are different flyvideo cards with different tuners
saa7130[0]: out there, you might have to use the tuner=nr insmod
saa7130[0]: option to override the default value.
saa7130[0]: registered input device for IR
tuner 1-0060: chip found @ 0xc0 (saa7130[0])
tuner 1-0060: type set to 37 (LG PAL (newer TAPC series))
saa7130[0]: i2c eeprom read error (err=-5)
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
saa7130[0]: registered device radio0
saa7130[0]/irq[10,790898]: r=0x20 s=0x10 PE
saa7130[0]/irq: looping -- clearing PE (parity error!) enable bit

Postup zprovoznění pod Linuxem

modprobe saa7134 card=54 tuner=43

Poznámka

TVtime pracuje s tunerom bez problemov, obraz a citlivost je lepsia ako som mal na ATI TV Wonder.
FM tuner a teletext zatial nefunguje.

Dokument vytvořil: Zaphod, 22.8.2005 09:39 | Poslední úprava: soptik2, 27.2.2011 15:09 | Historie změn | Zobrazeno: 1311×

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.