Huawei E160

Text na modemu:
HUAWEI Mobile Connect
Model: E160 HSDPA USB Stick
FCC ID: QISE 160

Modem podporuje síť GSM ve všech čtyřech dostupných pásmech a síť WCDMA ve třech pásmech. K dispozici je základní GPRS, o něco rychlejší EDGE a nejrychlejší 3G (UMTS) včetně nadstavby HSDPA. (zdroj: http://mobilizujeme.cz/clanky/vyzkouseli-jsme-usb-modem-huawei-e160-od-o2/)

Testovany modem byl brandovany T-Mobile, ale nebyl blokovany na operatora, vyzkouseno se SIM Vodafone.

dmesg

[ 5165.464638] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 5165.608887] usb 1-3: configuration #1 chosen from 1 choice
[ 5165.611050] scsi7 : SCSI emulation for USB Mass Storage devices
[ 5165.611287] usb-storage: device found at 8
[ 5165.611291] usb-storage: waiting for device to settle before scanning
[ 5165.611903] usb 1-3: USB disconnect, address 8
[ 5172.271455] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 5172.415883] usb 1-3: configuration #1 chosen from 1 choice
[ 5172.418345] option 1-3:1.0: GSM modem (1-port) converter detected
[ 5172.418544] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 5172.418945] option 1-3:1.1: GSM modem (1-port) converter detected
[ 5172.419070] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 5172.432131] scsi10 : SCSI emulation for USB Mass Storage devices
[ 5172.439868] usb-storage: device found at 9
[ 5172.439871] usb-storage: waiting for device to settle before scanning
[ 5172.461368] scsi11 : SCSI emulation for USB Mass Storage devices
[ 5172.463288] usb-storage: device found at 9
[ 5172.463290] usb-storage: waiting for device to settle before scanning
[ 5177.437575] usb-storage: device scan complete
[ 5177.439513] scsi 10:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[ 5177.461517] sr1: scsi-1 drive
[ 5177.461690] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 5177.461790] sr 10:0:0:0: Attached scsi generic sg2 type 5
[ 5177.467756] usb-storage: device scan complete
[ 5177.470177] scsi 11:0:0:0: Direct-Access     HUAWEI   MMC Storage      2.31 PQ: 0 ANSI: 2
[ 5177.471676] sd 11:0:0:0: Attached scsi generic sg3 type 0
[ 5177.481136] sd 11:0:0:0: [sdb] Attached SCSI removable disk

lsusb

Bus 001 Device 009: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem

Mel jsem moznost pouze kratce vyzkouset na Kubuntu Lucid Lynx 10.04 - po pripojeni v KnetworkManageru ikona, staci na ni kliknout a zadat tel. cislo *99# a nazev APN internet

Ma v sobe ctecku micro SD karet, ktera funguje podivne - prestoze se v dmesg objevi:

sd 26:0:0:0: [sdb] Attached SCSI removable disk

tak fdisk -l nic neukaze, v KDE taky neni videt

Pokud dam cat /dev/sdb, vypisuje se mi obsah SD karty a ejhle, fdisk -l ji uz vidi a je mozne SD kartu rucne primountovat a pracovat s ni

Testovana micro SD byla 2 GB Kingston...