D-Link DBT-120 rev. B3

zalezi na verzi fw

hci0:   Type: USB
        BD Address: 00:0D:88:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8
        HCI 18.2
        Chip version: BlueCore02-External
        Max key size: 128 bit
        SCO mapping:  HCI

hci0:   Type: USB
        BD Address: 00:0D:88:xx:xx:xx ACL MTU: 192:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:226 acl:0 sco:0 events:20 errors:0
        TX bytes:413 acl:0 sco:0 commands:19 errors:0
        Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: ACCEPT MASTER
        Name: 'Linux (notas)'
        Class: 0x100100
        Service Classes:
        Device Class: Computer, Uncategorized
        HCI Ver: 1.2 (0x2) HCI Rev: 0x632 LMP Ver: 1.2 (0x2) LMP Subver: 0x632
        Manufacturer: Cambridge Silicon Radio (10)

hci0:   Type: USB
        BD Address: 00:0D:88:xx:xx:xx ACL MTU: 192:8 SCO MTU: 64:8
        Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
                <3-slot packets> <5-slot packets> <encryption> <slot offset>
                <timing accuracy> <role switch> <hold mode> <sniff mode>
                <park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
                <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
                <power control> <transparent SCO> <broadcast encrypt>
                <enhanced iscan> <interlaced iscan> <interlaced pscan>
                <inquiry with RSSI> <AFH cap. slave> <AFH class. slave>
                <AFH cap. master> <AFH class. master> <extended features>

modprobe hci_usb && hciconfig hci0 up #verze 1.1
hid2hci && modprobe hci_usb && hciconfig hci0 up #verze 1.2

Lze flashnout z verze BT 1.1 fw 15.3 56bit encryption bez HID proxy na BT 1.2 fw 18.2 se 128bit encryption a s HID proxy modem