Microcom Bluetooth USB Adapter NG 1393

V dodávce je samotné zařízení (bez konektoru je jen 5cm dlouhé, 2cm široké a 0.5cm vysoké), prodlužovací USB kabel (asi 15cm), záruční list, anglický návod pro instalaci ve Windows a CD s ovladači pro Windows 2000, ME a XP. Činnost BT indikuje modrá dioda na vrchu zařízení.

Údaje výrobce

Dosah až 100 metru 
Standard Bluetooth specifikace V2.0
Interface USB 2.0 (1.0 kompatibilni)
Frekvenční rozsah 2402 az 2480 MHz
Tx Power 0.25 az 2.5 mW (Bluetooth Power Class I)
Rx citlivost < -80 dBm (BER 0.1%) 

/var/log/messages

kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
kernel: Bluetooth: HCI USB driver ver 2.8
kernel: usbcore: registered new driver hci_usb
hcid[3636]: HCI dev 0 registered
hcid[3636]: HCI dev 0 up
hcid[3636]: Starting security manager 0 

/proc/bus/usb/devices

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=07b8 ProdID=b02c Rev= 0.00
S:  Manufacturer=Broadcom Corp
S:  Product=BCM92045DG Non-UHE
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

Žádný, vložím a zařízeni jako takové funguje.

Odzkoušeno s Nokia 6230i a FC3.

bluez-utils-2.10-2
bluez-bluefw-1.0-6
bluez-libs-devel-2.10-2
bluez-hcidump-1.11-1
bluez-libs-2.10-2