Prevodnik USB/RS232 UC232A

Prevodnik USB/RS232 UC232A od ATEN International Co. Ltd.

=== lsusb:

  idVendor           0x0557 ATEN International Co. Ltd.
  idProduct          0x2008 
    MaxPower              100mA

=== dmesg:

hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x557/0x2008) is not claimed by any active driver.
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for PL-2303
usbserial.c: PL-2303 converter detected
usbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.9
usb.c: USB disconnect on device 2
usbserial.c: PL-2303 converter now disconnected from ttyUSB0

kernel 2.4.18-27.7.x

moduly: usbserial, pl2303 zarizeni: /dev/ttyUSB0

viz poznamka a postup zprovoznovani u http://abclinuxu.cz/hardware/ViewRelation?relationId=5533

nakonec ještě používám "chmod 777 /dev/ttyUSB0" (poznámka by Vencour)

testovano jen s modemem pres minicom a prikaz atdt ... passed

používám gtkterm (poznámka by Vencour)