Compaq Presario 425
| Podpora: | kompletní |
| Ovladač: | v jádře |
Technické parametry
COMPAQ PRESARIO 425
CPU Intel 486SX/33MHz standardne, mam v nem AMD 486DX2/66MHz)
4 MB RAM standardne, mam v nem 20 MB
100 nebo 200 MB HD standardne, nyni mam Caviar 1210 212,6 MB.
Lze pridat i druhy disk, ale CDROM asi nezvladne, pokousel jsem se, ale bez uspechu.
floppy 3.5" 1.44MB
2x 8(16) bit ISA sloty.
Grafika: Integrovana, k tomu Built-in 14-inch, high-resolution SVGA (MPRII compliant) color monitor with 0.28-mm dot pitch. Monitor je spolecne se zbytkem hw v jedny bedne, proste desktop jak ma byt :o)
Dale tu mame PS/2 mys a klavesnici
1x COM, 1x LPT a 1x gameport.
Do jednoho ISA slotu jsem soupnul starou sitovku vzor NE2000, 10MBit, BNC i RJ konektor.
CPU Intel 486SX/33MHz standardne, mam v nem AMD 486DX2/66MHz)
4 MB RAM standardne, mam v nem 20 MB
100 nebo 200 MB HD standardne, nyni mam Caviar 1210 212,6 MB.
Lze pridat i druhy disk, ale CDROM asi nezvladne, pokousel jsem se, ale bez uspechu.
floppy 3.5" 1.44MB
2x 8(16) bit ISA sloty.
Grafika: Integrovana, k tomu Built-in 14-inch, high-resolution SVGA (MPRII compliant) color monitor with 0.28-mm dot pitch. Monitor je spolecne se zbytkem hw v jedny bedne, proste desktop jak ma byt :o)
Dale tu mame PS/2 mys a klavesnici
1x COM, 1x LPT a 1x gameport.
Do jednoho ISA slotu jsem soupnul starou sitovku vzor NE2000, 10MBit, BNC i RJ konektor.
Identifikace pod Linuxem
Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:43:01 PDT 2003
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000001400000 (usable)
20MB LOWMEM available.
On node 0 totalpages: 5120
zone(0): 4096 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Console: colour VGA+ 80x25
Calibrating delay loop... 33.28 BogoMIPS
Memory: 17028k/20480k available (1813k kernel code, 3064k reserved, 614k data, 116k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: After generic, caps: 00000000 00000000 00000000 00000000
CPU: Common caps: 00000000 00000000 00000000 00000000
CPU: 486
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: System does not support PCI
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000001400000 (usable)
20MB LOWMEM available.
On node 0 totalpages: 5120
zone(0): 4096 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Console: colour VGA+ 80x25
Calibrating delay loop... 33.28 BogoMIPS
Memory: 17028k/20480k available (1813k kernel code, 3064k reserved, 614k data, 116k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: After generic, caps: 00000000 00000000 00000000 00000000
CPU: Common caps: 00000000 00000000 00000000 00000000
CPU: 486
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: System does not support PCI
Postup zprovoznění pod Linuxem
Na uvedenem HW mi bezi Slackware 9.1, ktery jsem ovsem instaloval na jinem PC (nemohl jsem pripojit CDROM a s NFS byly problemy, vysvetlim dale).
Nainstaloval jsem zakladni system, tzn. neco z adresaru /a, /l a /n.
Po nabootovani jsem na svem PC rozjel NFS (v /etc/exports mam pouze "/mnt/cdrom compaq(ro,sync)"), na Compaqu vse pripojuji do adresare /packages (v /etc/fstab mam "mojepc:/mnt/cdrom /packages nfs ro,hard,intr,rsize=1024,wsize=1024 0 0")
NFS bez tohoto upresneni nefungovalo, presneji receno, zkopirovala se vzdy pouze prvni ctvrtina souboru a pak se to kouslo. S timto nastavenim bezi vse v poradku.
Poznámka
Tento "stroj" ted slouzi jako maly postovni server (smtp a pop3) pro lokalni sit (5 PC), k experimentum s NFS, da se k nemu pripojit take pres ssh.
Obrázky
