Portál AbcLinuxu, 2. května 2025 05:39
| Podpora: | kompletní |
| Ovladač: | v jádře |
dmesg:
Linux version 2.6.15-ARCH (root@Wohnung) (gcc-Version 4.0.3 20051222 (prerelease)) #1 SMP PREEMPT Tue Jan 3 11:28:36 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001efd0000 (usable) BIOS-e820: 000000001efd0000 - 000000001efde000 (ACPI data) BIOS-e820: 000000001efde000 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 495MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 126928 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 122832 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f8850 ACPI: RSDT (v001 A M I OEMRSDT 0x06000506 MSFT 0x00000097) @ 0x1efd0000 ACPI: FADT (v002 A M I OEMFACP 0x06000506 MSFT 0x00000097) @ 0x1efd0200 ACPI: MADT (v001 A M I OEMAPIC 0x06000506 MSFT 0x00000097) @ 0x1efd0390 ACPI: MCFG (v001 A M I OEMMCFG 0x06000506 MSFT 0x00000097) @ 0x1efd03f0 ACPI: OEMB (v001 A M I AMI_OEM 0x06000506 MSFT 0x00000097) @ 0x1efde040 ACPI: MCFG (v001 A M I OEMMCFG 0x06000506 MSFT 0x00000097) @ 0x1efd4b80 ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x1efd4bc0 ACPI: DSDT (v001 255EI 255EI008 0x00000008 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1f000000:c1000000) Built 1 zonelists Kernel command line: root=/dev/sda2 ro vga=792 noacpictimer ec_burst=1 ACPI: EC burst mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1733.746 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 495144k/507712k available (2652k kernel code, 11976k reserved, 720k data, 252k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3470.73 BogoMIPS (lpj=6941465) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Total of 1 processors activated (3470.73 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 3025k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 ACPI: 2 duplicate MCFG table ignored. PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] burst-mode-ec-10-Aug ACPI: Embedded Controller [EC0] (gpe 24) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:03.0 IO window: 0000c000-0000c0ff IO window: 0000c400-0000c4ff PREFETCH window: 22000000-23ffffff MEM window: 24000000-25ffffff PCI: Bridge: 0000:00:1e.0 IO window: c000-dfff MEM window: ff400000-ffcfffff PREFETCH window: bdf00000-bfefffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 16 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered vesafb: framebuffer at 0xd0000000, mapped to 0xdf880000, using 6144k, total 16064k vesafb: mode is 1024x768x32, linelength=4096, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ACPI: Video Device [PEG] (multi-head: yes rom: no post: no) ACPI: Video Device [IGD] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (27 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Using IPI Shortcut mode RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide Emulex LightPulse Fibre Channel SCSI driver 8.1.0 Copyright(c) 2004-2005 Emulex. All rights reserved. QLogic Fibre Channel HBA Driver seagate: ST0x/TMC-8xx not detected. st: Version 20050830, fixed bufsize 32768, s/g segs 256 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. sym53c416.c: Version 1.0.0-ac scsi: <fdomain> Detection failed (no card) Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers input: SynPS/2 Synaptics TouchPad as /class/input/input1 3ware Storage Controller device driver for Linux v1.26.02.001. imm: Version 2.05 (for Linux 2.4.0) ipr: IBM Power RAID SCSI Device Driver version: 2.1.0 (October 31, 2005) Adaptec aacraid driver (1.1-4 Jan 3 2006 11:11:20) nsp32: loading... libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 ACPI: PCI interrupt for device 0000:00:1f.2 disabled ahci: probe of 0000:00:1f.2 failed with error -12 osst :I: Tape driver with OnStream support version 0.99.3 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ NCR53c406a: no available ports found ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3c09 87:6023 88:203f ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48 ata1(0): applying bridge limits ata1: dev 0 configured for UDMA/100 scsi2 : ata_piix Vendor: ATA Model: TOSHIBA MK8032GA Rev: AD00 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15 ata2: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi3 : ata_piix Vendor: Slimtype Model: DVDRW SOSW-852S Rev: PSU2 Type: CD-ROM ANSI SCSI revision: 05 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) megasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005 megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005) Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Fusion MPT base driver 3.03.04 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT misc device (ioctl) driver 3.03.04 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) Fusion MPT SAS Host driver 3.03.04 Fusion MPT SPI Host driver 3.03.04 Fusion MPT FC Host driver 3.03.04 JFS: nTxBlock = 3893, nTxLock = 31148 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names Freeing unused kernel memory: 252k freed Adding 538168k swap on /dev/sda4. Priority:-1 extents:1 across:538168k ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names usbcore: registered new driver usbfs usbcore: registered new driver hub Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18 [drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module. DRM: Fill_in_dev failed. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 16124K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 hw_random hardware driver 1.0.0 loaded Real Time Clock Driver v1.12 input: PC Speaker as /class/input/input2 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1b.0 to 64 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 17 eth0: Identified chip type is 'RTL8169s/8110s'. eth0: RTL8169 at 0xe05c4c00, 00:03:0d:38:a4:f1, IRQ 17 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 19 (level, low) -> IRQ 17 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 16 Yenta: CardBus bridge found at 0000:01:03.0 [1584:3200] Yenta: adjusting diagnostic: 40 -> 60 Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:01:03.0, mfunc 0x000c1002, devctl 0x44 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff cs: IO port probe 0xc000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xff400000 - 0xffcfffff pcmcia: parent PCI bridge Memory window: 0xbdf00000 - 0xbfefffff Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffe3fc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e480 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected cs: IO port probe 0x3d4-0x4ff: excluding 0x3f4-0x423 0x4cc-0x4d3 cs: IO port probe 0x3c0-0x3d2: clean. cs: IO port probe 0x100-0x3af: excluding 0x370-0x377 cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000e880 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org> ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[ffcff000-ffcff7ff] Max Packet=[2048] eth1394: $Rev: 1312 $ Ben Collins <bcollins@debian.org> eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d49255fd2c6] Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.6 PPP Deflate Compression module registered
Instalace. U mne je to Arch Linux. Problém byl s acpi, kde vyskakovaly nějaké chyby. Řešení jsem nalezl googlem - vložit "noacpictimer ec_burst=1" do parametrů jádra. Dále je potřeba balíky synaptics (extra) pro ovladač touchpadu a 855resolution (AUR), který umožňuje patchnout grafiku kvůli nastavení rozlišení 1680x1050. Je potřeba upravit /etc/conf.d/855resolution, kde je potřeba doplnit hodnoty "5c" "1680 1050". Potom do /etc/rc.conf do DAEMONS přidat 855resolution.
Vypíchnu sem ještě xorg.conf
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "synaptics"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
ModulePath "/usr/X11R6/lib/modules"
ModulePath "/usr/X11R6/lib/modules/dri"
ModulePath "/usr/X11R6/lib/modules/drivers"
ModulePath "/usr/X11R6/lib/modules/extensions"
ModulePath "/usr/X11R6/lib/modules/fonts"
ModulePath "/usr/X11R6/lib/modules/input"
ModulePath "/usr/X11R6/lib/modules/linux"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us, cz_qwerty"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "synaptics"
Option "Emulate3Buttons"
Option "ZAxisMapping" "4 5 6 7"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mouse1"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "LCD Prestigio"
HorizSync 31.5 - 65.23
VertRefresh 60
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Intel"
BoardName "Intel 915 GM"
EndSection
Section "Device"
Identifier "Intel 915 GM"
Driver "i810"
VideoRam 65536
VendorName "Intel"
BusID "PCI:0:2:0"
# Insert Clocks lines here if appropriate
EndSection
Section "Screen"
Identifier "LCD Panel"
Device "Intel 915 GM"
Monitor "LCD Prestigio"
DefaultDepth 24
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1680x1050_60.00" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "LCD Panel"
InputDevice "Touchpad" "CorePointer"
InputDevice "Mouse"
InputDevice "Keyboard" "CoreKeyboard"
EndSection
Debian testing/unstable (xorg 6.9.0.dfsg.1-4, distribucni kernel 2.6.15-8) mel s grafikou i915 problemy (asi bugy) - bylo nutne sekci "Device" obohatit o dva radky
Option "NoAccel" "true"
Option "SWCursor" "true"
Prvni zpusobil, ze se grafika zobrazila (nikoliv jen cerna obrazovka) a druhy, ze se ukazal i kurzor mysi.
Graficka karta nVidia jede bez problemu:
Section "Device"
Identifier "nVidia 6600 Go"
Driver "nvidia"
VendorName "nVidia Corporation"
BusID "PCI:3:0:0"
EndSection
Dale byly problemy s rozchozenim disku/dvd-rom. Instalaci spustit jako
expert BOOT_DEBUG=3na prikazove radce spustit
nano /etc/modprobe.confa vlozit do nej radek
options libata atapi_enabled=1Pote ukoncit shell a instalace bude nadale pokracovat i se spravne nadetekovanym diskem a dvd-rom. Od jadra 2.6.16 by to mela byt jiz implicitni hodnota jadra, takze by s instalaci na SATA zarizeni nemely byt problemy.
s wifi, lan i keningston nebyly problemy
Po prechodu na debiani distribucni 2.6.16 mi nejela mys ani touchpad - nebyly vytvoreny zarizeni
/dev/input/miceani
/dev/psauxPo nacteni modulu
mousedevto jiz funguje.
Dokument vytvořil: Nejsemtu, 14.1.2006 12:36 | Poslední úprava: neaktivni, 27.2.2011 15:09 | Další přispěvatelé: le0s, Lubos Kopecky | Historie změn | Zobrazeno: 1296×
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.