Satellite Pro 4300 series
    
        Technické parametry
        
            Intel Pentium III (Coppermine, 256KB cache)
11,2GB HDD
6x DVD-ROM
3,5" 1,44 MB FDD
64MB RAM (max. 320MB)
14,1" 1024x768 LCD
S3 Mobile Savage IX/MX 8MB 2x AGP grafika
Yamaha YFM-??? (SB-komp.) zvuk
56K interni modem (Toshiba, v.90)
2x PCMCIA II
integrovane repro
        
        Identifikace pod Linuxem
        
            XF86Config:
Section "Files"
  RgbPath	"/usr/X11R6/lib/X11/rgb"
  FontPath	"/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath	"/usr/X11R6/lib/X11/fonts/local"
EndSection
Section "ServerFlags"
  AllowMouseOpenFail
EndSection
Section "Module"
EndSection
Section "Keyboard"
  Protocol	"Standard"
  XkbRules	"xfree86"
  XkbModel	"pc104"
  XkbLayout	"us"
EndSection
Section "Pointer"
  Protocol		"PS/2"
  Device		"/dev/psaux"
  SampleRate		60
  Emulate3Buttons
  Emulate3Timeout	200
  BaudRate		1200
EndSection
Section "Monitor"	
  Identifier	"Primary-Monitor"
  VendorName	"!!! LCD !!!"
  ModelName	"XGA 1024X768@60HZ"
  HorizSync	31.5-60
  VertRefresh	58-62
  Modeline "800x600" 40.35 800 816 928 1040 600 600 606 626
  Modeline "640x480" 25.79 640 656 720 832 480 480 484 501
  Modeline "1024x768" 66.00 1024 1040 1216 1328 768 768 775 802
  Modeline "1600x1200" 124.80 1600 1616 1968 2080 1200 1200 1209 1253
EndSection
Section "Device"
  Identifier	"Primary-Card"
  VendorName	"!!! GENERIC SERVER SELECTION !!!"
  BoardName	"SVGA"
EndSection
Section "Screen"  
  Driver	"SVGA"
  Device	"Primary-Card"
  Monitor	"Primary-Monitor"
  DefaultColorDepth	32
  SubSection "Display"
    Depth	32
    Modes	"1024x768" 
    Virtual	1024 768
  EndSubSection
EndSection
Section "Screen"  
  Driver	"Accel"
  Device	"Primary-Card"
  Monitor	"Primary-Monitor"
  DefaultColorDepth	32
  SubSection "Display"
    Depth	32
    Modes	"1024x768" 
    Virtual	1024 768
  EndSubSection
EndSection
        
        Postup zprovoznění pod Linuxem
        
            RedHat 6.2 a 7.0 i SuSE 7.0 instalace OK (pouze v textovem rezimu).
nastaveni Xwindows je komplikovanejsi, S3 (http://www.s3graphics.com/DRVVIEW.HTM) sice poskytuje ovladace do Xf86 v3, ale pri instalaci nahlasil "You must have Xfree86 installed" ackoli tam byly.
Pro SuSE je reseni xsvga-3.3.6-79.i386.rpm, vzdy lze Xsvga instalovat rucne.
Nyni (po lehcim boji) funguje 1024x768x32bit, graficky login (startx odmita pripojit windowmanager), login do grafiky OK.
apm pod RH 6.2 hlasi zmeny situace baterii, vice jsem zatim nezkoumal
        
        Poznámka
        
            modem jsem zatim pod Linuxem nepokousel
zvukovka se nasla, ale instalace az casem...
celkove bez problemu