Toshiba NB100

hmotnost vcetne aku, bez zdroje ... 1kg
CPU: Intel(R) Atom(TM) CPU N270   @ 1.60GHz, rizeni pres acpi_cpufreq
HDD: SATA 2.5" 120GB, TOSHIBA MK1252GSX
bez CDROM, DVD a FD
RAM 1GB
SDHC reader ... usb-storage
webcam, rozliseni VGA ... uvcvideoCNF8029
bluetooth ... btusb
WiFi 802.11bg ... ath5k_pci, AR2425
Ethernet 10/100 ... RTL8102e r8169
audio MIC in, EAR out ... HDA Intel
3x USB
grafika Intel 945GME ... xorg driver intel, rozliseni 1024x600
VGA vystup
touchpad
klavesnice ... mala tlacitka, v seru necitelny potisk, nektere obvykle klavesy jen pre Fn (pgup, pgdn, home, end)

dmesg:

Dec 27 13:27:15 nb100 BIOS EBDA/lowmem at: 0009fc00/0009fc00
Dec 27 13:27:15 nb100 Initializing cgroup subsys cpuset
Dec 27 13:27:15 nb100 Linux version 2.6.28-gentoo (root@nb100) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP Fri Dec 26 21:13:04 CET 2008
Dec 27 13:27:15 nb100 KERNEL supported cpus:
Dec 27 13:27:15 nb100 Intel GenuineIntel
Dec 27 13:27:15 nb100 AMD AuthenticAMD
Dec 27 13:27:15 nb100 NSC Geode by NSC
Dec 27 13:27:15 nb100 Cyrix CyrixInstead
Dec 27 13:27:15 nb100 Centaur CentaurHauls
Dec 27 13:27:15 nb100 Transmeta GenuineTMx86
Dec 27 13:27:15 nb100 Transmeta TransmetaCPU
Dec 27 13:27:15 nb100 UMC UMC UMC UMC
Dec 27 13:27:15 nb100 BIOS-provided physical RAM map:
Dec 27 13:27:15 nb100 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Dec 27 13:27:15 nb100 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 0000000000100000 - 000000003f5ed000 (usable)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f5ed000 - 000000003f63f000 (ACPI NVS)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f63f000 - 000000003f676000 (usable)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f676000 - 000000003f6bf000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f6bf000 - 000000003f6f0000 (usable)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f6f0000 - 000000003f6ff000 (ACPI data)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
Dec 27 13:27:15 nb100 BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Dec 27 13:27:15 nb100 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Dec 27 13:27:15 nb100 DMI 2.4 present.
Dec 27 13:27:15 nb100 last_pfn = 0x3f700 max_arch_pfn = 0x100000
Dec 27 13:27:15 nb100 kernel direct mapping tables up to 373fe000 @ 7000-d000
Dec 27 13:27:15 nb100 ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
Dec 27 13:27:15 nb100 ACPI: XSDT 3F6FE120, 0064 (r1 TOSINV TOSINV00        1       1000013)
Dec 27 13:27:15 nb100 ACPI: FACP 3F6FC000, 00F4 (r4 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: DSDT 3F6F2000, 55BB (r1 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: FACS 3F608000, 0040
Dec 27 13:27:15 nb100 ACPI: SSDT 3F6FD000, 04C4 (r2  PmRef    CpuPm     3000 INTL 20051117)
Dec 27 13:27:15 nb100 ACPI: HPET 3F6FB000, 0038 (r1 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: APIC 3F6FA000, 0068 (r2 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: MCFG 3F6F9000, 003C (r1 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: ASF! 3F6F8000, 00A5 (r32 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: SLIC 3F6F1000, 0180 (r1 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: BOOT 3F6F0000, 0028 (r1 TOSINV TOSINV00        1 MSFT  1000013)
Dec 27 13:27:15 nb100 ACPI: Local APIC address 0xfee00000
Dec 27 13:27:15 nb100 131MB HIGHMEM available.
Dec 27 13:27:15 nb100 883MB LOWMEM available.
Dec 27 13:27:15 nb100 mapped low ram: 0 - 373fe000
Dec 27 13:27:15 nb100 low ram: 00000000 - 373fe000
Dec 27 13:27:15 nb100 bootmap 00009000 - 0000fe80
Dec 27 13:27:15 nb100 (8 early reservations) ==> bootmem [0000000000 - 00373fe000]
Dec 27 13:27:15 nb100 #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Dec 27 13:27:15 nb100 #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Dec 27 13:27:15 nb100 #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Dec 27 13:27:15 nb100 #3 [0000100000 - 00005fdb40]    TEXT DATA BSS ==> [0000100000 - 00005fdb40]
Dec 27 13:27:15 nb100 #4 [00005fe000 - 0000601000]    INIT_PG_TABLE ==> [00005fe000 - 0000601000]
Dec 27 13:27:15 nb100 #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Dec 27 13:27:15 nb100 #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
Dec 27 13:27:15 nb100 #7 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
Dec 27 13:27:15 nb100 Zone PFN ranges:
Dec 27 13:27:15 nb100 DMA      0x00000000 -> 0x00001000
Dec 27 13:27:15 nb100 Normal   0x00001000 -> 0x000373fe
Dec 27 13:27:15 nb100 HighMem  0x000373fe -> 0x0003f700
Dec 27 13:27:15 nb100 Movable zone start PFN for each node
Dec 27 13:27:15 nb100 early_node_map[5] active PFN ranges
Dec 27 13:27:15 nb100 0: 0x00000000 -> 0x0000009f
Dec 27 13:27:15 nb100 0: 0x00000100 -> 0x0003f5ed
Dec 27 13:27:15 nb100 0: 0x0003f63f -> 0x0003f676
Dec 27 13:27:15 nb100 0: 0x0003f6bf -> 0x0003f6f0
Dec 27 13:27:15 nb100 0: 0x0003f6ff -> 0x0003f700
Dec 27 13:27:15 nb100 On node 0 totalpages: 259573
Dec 27 13:27:15 nb100 free_area_init_node: node 0, pgdat c0476500, node_mem_map c1000000
Dec 27 13:27:15 nb100 DMA zone: 32 pages used for memmap
Dec 27 13:27:15 nb100 DMA zone: 0 pages reserved
Dec 27 13:27:15 nb100 DMA zone: 3967 pages, LIFO batch:0
Dec 27 13:27:15 nb100 Normal zone: 1736 pages used for memmap
Dec 27 13:27:15 nb100 Normal zone: 220470 pages, LIFO batch:31
Dec 27 13:27:15 nb100 HighMem zone: 263 pages used for memmap
Dec 27 13:27:15 nb100 HighMem zone: 33105 pages, LIFO batch:7
Dec 27 13:27:15 nb100 Movable zone: 0 pages used for memmap
Dec 27 13:27:15 nb100 ACPI: PM-Timer IO Port: 0x408
Dec 27 13:27:15 nb100 ACPI: Local APIC address 0xfee00000
Dec 27 13:27:15 nb100 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Dec 27 13:27:15 nb100 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Dec 27 13:27:15 nb100 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Dec 27 13:27:15 nb100 ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Dec 27 13:27:15 nb100 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Dec 27 13:27:15 nb100 IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Dec 27 13:27:15 nb100 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 27 13:27:15 nb100 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Dec 27 13:27:15 nb100 ACPI: IRQ0 used by override.
Dec 27 13:27:15 nb100 ACPI: IRQ2 used by override.
Dec 27 13:27:15 nb100 ACPI: IRQ9 used by override.
Dec 27 13:27:15 nb100 Enabling APIC mode:  Flat.  Using 1 I/O APICs
Dec 27 13:27:15 nb100 ACPI: HPET id: .............. base: 0xfed00000
Dec 27 13:27:15 nb100 Using ACPI (MADT) for SMP configuration information
Dec 27 13:27:15 nb100 SMP: Allowing 2 CPUs, 0 hotplug CPUs
Dec 27 13:27:15 nb100 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Dec 27 13:27:15 nb100 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Dec 27 13:27:15 nb100 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Dec 27 13:27:15 nb100 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Dec 27 13:27:15 nb100 PERCPU: Allocating 40960 bytes of per cpu data
Dec 27 13:27:15 nb100 NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
Dec 27 13:27:15 nb100 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257542
Dec 27 13:27:15 nb100 Kernel command line: auto BOOT_IMAGE=gentoo ro root=802
Dec 27 13:27:15 nb100 Enabling fast FPU save and restore... done.
Dec 27 13:27:15 nb100 Enabling unmasked SIMD FPU exception support... done.
Dec 27 13:27:15 nb100 Initializing CPU#0
Dec 27 13:27:15 nb100 CPU 0 irqstacks, hard=c0570000 soft=c0530000
Dec 27 13:27:15 nb100 PID hash table entries: 4096 (order: 12, 16384 bytes)
Dec 27 13:27:15 nb100 Fast TSC calibration using PIT
Dec 27 13:27:15 nb100 Detected 1596.090 MHz processor.
Dec 27 13:27:15 nb100 Console: colour VGA+ 80x25
Dec 27 13:27:15 nb100 console [tty0] enabled
Dec 27 13:27:15 nb100 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Dec 27 13:27:15 nb100 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 27 13:27:15 nb100 Memory: 1023756k/1039360k available (2437k kernel code, 14244k reserved, 1477k data, 340k init, 133472k highmem)
Dec 27 13:27:15 nb100 virtual kernel memory layout:
Dec 27 13:27:15 nb100 fixmap  : 0xffc78000 - 0xfffff000   (3612 kB)
Dec 27 13:27:15 nb100 pkmap   : 0xff400000 - 0xff800000   (4096 kB)
Dec 27 13:27:15 nb100 vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
Dec 27 13:27:15 nb100 lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
Dec 27 13:27:15 nb100 .init : 0xc04d8000 - 0xc052d000   ( 340 kB)
Dec 27 13:27:15 nb100 .data : 0xc036161e - 0xc04d2cdc   (1477 kB)
Dec 27 13:27:15 nb100 .text : 0xc0100000 - 0xc036161e   (2437 kB)
Dec 27 13:27:15 nb100 Checking if this processor honours the WP bit even in supervisor mode...Ok.
Dec 27 13:27:15 nb100 hpet clockevent registered
Dec 27 13:27:15 nb100 HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Dec 27 13:27:15 nb100 Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.18 BogoMIPS (lpj=15960900)
Dec 27 13:27:15 nb100 Security Framework initialized
Dec 27 13:27:15 nb100 Mount-cache hash table entries: 512
Dec 27 13:27:15 nb100 Initializing cgroup subsys ns
Dec 27 13:27:15 nb100 Initializing cgroup subsys cpuacct
Dec 27 13:27:15 nb100 Initializing cgroup subsys freezer
Dec 27 13:27:15 nb100 CPU: L1 I cache: 32K, L1 D cache: 24K
Dec 27 13:27:15 nb100 CPU: L2 cache: 512K
Dec 27 13:27:15 nb100 CPU: Physical Processor ID: 0
Dec 27 13:27:15 nb100 CPU: Processor Core ID: 0
Dec 27 13:27:15 nb100 Intel machine check architecture supported.
Dec 27 13:27:15 nb100 Intel machine check reporting enabled on CPU#0.
Dec 27 13:27:15 nb100 using mwait in idle threads.
Dec 27 13:27:15 nb100 Checking 'hlt' instruction... OK.
Dec 27 13:27:15 nb100 ACPI: Core revision 20080926
Dec 27 13:27:15 nb100 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec 27 13:27:15 nb100 CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Dec 27 13:27:15 nb100 CPU 1 irqstacks, hard=c0571000 soft=c0531000
Dec 27 13:27:15 nb100 Booting processor 1 APIC 0x1 ip 0x6000
Dec 27 13:27:15 nb100 Initializing CPU#1
Dec 27 13:27:15 nb100 Calibrating delay using timer specific routine.. 3191.99 BogoMIPS (lpj=15959995)
Dec 27 13:27:15 nb100 CPU: L1 I cache: 32K, L1 D cache: 24K
Dec 27 13:27:15 nb100 CPU: L2 cache: 512K
Dec 27 13:27:15 nb100 CPU: Physical Processor ID: 0
Dec 27 13:27:15 nb100 CPU: Processor Core ID: 0
Dec 27 13:27:15 nb100 Intel machine check architecture supported.
Dec 27 13:27:15 nb100 Intel machine check reporting enabled on CPU#1.
Dec 27 13:27:15 nb100 CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Dec 27 13:27:15 nb100 checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Dec 27 13:27:15 nb100 Brought up 2 CPUs
Dec 27 13:27:15 nb100 Total of 2 processors activated (6384.17 BogoMIPS).
Dec 27 13:27:15 nb100 net_namespace: 500 bytes
Dec 27 13:27:15 nb100 Booting paravirtualized kernel on bare hardware
Dec 27 13:27:15 nb100 regulator: core version 0.5
Dec 27 13:27:15 nb100 NET: Registered protocol family 16
Dec 27 13:27:15 nb100 ACPI: bus type pci registered
Dec 27 13:27:15 nb100 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Dec 27 13:27:15 nb100 PCI: MCFG area at e0000000 reserved in E820
Dec 27 13:27:15 nb100 PCI: Using MMCONFIG for extended config space
Dec 27 13:27:15 nb100 PCI: Using configuration type 1 for base access
Dec 27 13:27:15 nb100 ACPI: EC: Look up EC in DSDT
Dec 27 13:27:15 nb100 ACPI: BIOS _OSI(Linux) query ignored
Dec 27 13:27:15 nb100 ACPI: EC: non-query interrupt received, switching to interrupt mode
Dec 27 13:27:15 nb100 ACPI: Interpreter enabled
Dec 27 13:27:15 nb100 ACPI: (supports S0 S3 S4 S5)
Dec 27 13:27:15 nb100 ACPI: Using IOAPIC for interrupt routing
Dec 27 13:27:15 nb100 ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Dec 27 13:27:15 nb100 ACPI: EC: driver started in interrupt mode
Dec 27 13:27:15 nb100 ACPI: No dock devices found.
Dec 27 13:27:15 nb100 ACPI: PCI Root Bridge [PCI0] (0000:00)
Dec 27 13:27:15 nb100 pci 0000:00:02.0: reg 10 32bit mmio: [0x54280000-0x542fffff]
Dec 27 13:27:15 nb100 pci 0000:00:02.0: reg 14 io port: [0x40f0-0x40f7]
Dec 27 13:27:15 nb100 pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
Dec 27 13:27:15 nb100 pci 0000:00:02.0: reg 1c 32bit mmio: [0x54300000-0x5433ffff]
Dec 27 13:27:15 nb100 pci 0000:00:02.1: reg 10 32bit mmio: [0x54200000-0x5427ffff]
Dec 27 13:27:15 nb100 pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0000000-0xd0003fff]
Dec 27 13:27:15 nb100 pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Dec 27 13:27:15 nb100 pci 0000:00:1b.0: PME# disabled
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: PME# disabled
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: PME# disabled
Dec 27 13:27:15 nb100 pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
Dec 27 13:27:15 nb100 pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
Dec 27 13:27:15 nb100 pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
Dec 27 13:27:15 nb100 pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
Dec 27 13:27:15 nb100 pci 0000:00:1d.7: reg 10 32bit mmio: [0x54344400-0x543447ff]
Dec 27 13:27:15 nb100 pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Dec 27 13:27:15 nb100 pci 0000:00:1d.7: PME# disabled
Dec 27 13:27:15 nb100 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Dec 27 13:27:15 nb100 pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Dec 27 13:27:15 nb100 pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Dec 27 13:27:15 nb100 pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Dec 27 13:27:15 nb100 pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Dec 27 13:27:15 nb100 pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Dec 27 13:27:15 nb100 pci 0000:00:1f.1: reg 20 io port: [0x40c0-0x40cf]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: reg 10 io port: [0x40d8-0x40df]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: reg 14 io port: [0x40fc-0x40ff]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: reg 18 io port: [0x40d0-0x40d7]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: reg 1c io port: [0x40f8-0x40fb]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: reg 20 io port: [0x4020-0x402f]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: reg 24 32bit mmio: [0x54344000-0x543443ff]
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: PME# supported from D3hot
Dec 27 13:27:15 nb100 pci 0000:00:1f.2: PME# disabled
Dec 27 13:27:15 nb100 pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
Dec 27 13:27:15 nb100 pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
Dec 27 13:27:15 nb100 pci 0000:01:00.0: reg 18 64bit mmio: [0x50010000-0x50010fff]
Dec 27 13:27:15 nb100 pci 0000:01:00.0: reg 20 64bit mmio: [0x50000000-0x5000ffff]
Dec 27 13:27:15 nb100 pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
Dec 27 13:27:15 nb100 pci 0000:01:00.0: supports D1 D2
Dec 27 13:27:15 nb100 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec 27 13:27:15 nb100 pci 0000:01:00.0: PME# disabled
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: bridge io port: [0x2000-0x3fff]
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: bridge 32bit mmio: [0x53200000-0x541fffff]
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x510fffff]
Dec 27 13:27:15 nb100 pci 0000:02:00.0: reg 10 64bit mmio: [0x52100000-0x5210ffff]
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff]
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: bridge 32bit mmio: [0x52100000-0x531fffff]
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51100000-0x520fffff]
Dec 27 13:27:15 nb100 pci 0000:00:1e.0: transparent bridge
Dec 27 13:27:15 nb100 bus 00 -> node 0
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12)
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 9 10 11 12)
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11 12)
Dec 27 13:27:15 nb100 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Dec 27 13:27:15 nb100 ACPI: Power Resource [FN00] (on)
Dec 27 13:27:15 nb100 SCSI subsystem initialized
Dec 27 13:27:15 nb100 libata version 3.00 loaded.
Dec 27 13:27:15 nb100 dca service started, version 1.4
Dec 27 13:27:15 nb100 PCI: Using ACPI for IRQ routing
Dec 27 13:27:15 nb100 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Dec 27 13:27:15 nb100 hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Dec 27 13:27:15 nb100 pnp: PnP ACPI init
Dec 27 13:27:15 nb100 ACPI: bus type pnp registered
Dec 27 13:27:15 nb100 pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.1 BAR 7 (0x1000-0x1fff), disabling
Dec 27 13:27:15 nb100 pnp: PnP ACPI: found 9 devices
Dec 27 13:27:15 nb100 ACPI: ACPI bus type pnp unregistered
Dec 27 13:27:15 nb100 system 00:01: ioport range 0x600-0x601 has been reserved
Dec 27 13:27:15 nb100 system 00:01: ioport range 0x800-0x80f has been reserved
Dec 27 13:27:15 nb100 system 00:01: ioport range 0x400-0x47f has been reserved
Dec 27 13:27:15 nb100 system 00:01: ioport range 0x500-0x53f has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
Dec 27 13:27:15 nb100 system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Dec 27 13:27:15 nb100 Switched to high resolution mode on CPU 1
Dec 27 13:27:15 nb100 Switched to high resolution mode on CPU 0
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Dec 27 13:27:15 nb100 pci 0000:00:1c.0:   IO window: 0x2000-0x3fff
Dec 27 13:27:15 nb100 pci 0000:00:1c.0:   MEM window: 0x53200000-0x541fffff
Dec 27 13:27:15 nb100 pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x000000510fffff
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Dec 27 13:27:15 nb100 pci 0000:00:1c.1:   IO window: 0x1000-0x1fff
Dec 27 13:27:15 nb100 pci 0000:00:1c.1:   MEM window: 0x52100000-0x531fffff
Dec 27 13:27:15 nb100 pci 0000:00:1c.1:   PREFETCH window: 0x00000051100000-0x000000520fffff
Dec 27 13:27:15 nb100 pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
Dec 27 13:27:15 nb100 pci 0000:00:1e.0:   IO window: disabled
Dec 27 13:27:15 nb100 pci 0000:00:1e.0:   MEM window: disabled
Dec 27 13:27:15 nb100 pci 0000:00:1e.0:   PREFETCH window: disabled
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Dec 27 13:27:15 nb100 pci 0000:00:1c.0: setting latency timer to 64
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Dec 27 13:27:15 nb100 pci 0000:00:1c.1: setting latency timer to 64
Dec 27 13:27:15 nb100 pci 0000:00:1e.0: setting latency timer to 64
Dec 27 13:27:15 nb100 bus: 00 index 0 io port: [0x00-0xffff]
Dec 27 13:27:15 nb100 bus: 00 index 1 mmio: [0x000000-0xffffffff]
Dec 27 13:27:15 nb100 bus: 01 index 0 io port: [0x2000-0x3fff]
Dec 27 13:27:15 nb100 bus: 01 index 1 mmio: [0x53200000-0x541fffff]
Dec 27 13:27:15 nb100 bus: 01 index 2 mmio: [0x50000000-0x510fffff]
Dec 27 13:27:15 nb100 bus: 01 index 3 mmio: [0x0-0x0]
Dec 27 13:27:15 nb100 bus: 02 index 0 io port: [0x1000-0x1fff]
Dec 27 13:27:15 nb100 bus: 02 index 1 mmio: [0x52100000-0x531fffff]
Dec 27 13:27:15 nb100 bus: 02 index 2 mmio: [0x51100000-0x520fffff]
Dec 27 13:27:15 nb100 bus: 02 index 3 mmio: [0x0-0x0]
Dec 27 13:27:15 nb100 bus: 03 index 0 mmio: [0x0-0x0]
Dec 27 13:27:15 nb100 bus: 03 index 1 mmio: [0x0-0x0]
Dec 27 13:27:15 nb100 bus: 03 index 2 mmio: [0x0-0x0]
Dec 27 13:27:15 nb100 bus: 03 index 3 io port: [0x00-0xffff]
Dec 27 13:27:15 nb100 bus: 03 index 4 mmio: [0x000000-0xffffffff]
Dec 27 13:27:15 nb100 NET: Registered protocol family 2
Dec 27 13:27:15 nb100 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 27 13:27:15 nb100 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 27 13:27:15 nb100 TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Dec 27 13:27:15 nb100 TCP: Hash tables configured (established 131072 bind 65536)
Dec 27 13:27:15 nb100 TCP reno registered
Dec 27 13:27:15 nb100 NET: Registered protocol family 1
Dec 27 13:27:15 nb100 Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Dec 27 13:27:15 nb100 Simple Boot Flag at 0x44 set to 0x1
Dec 27 13:27:15 nb100 Machine check exception polling timer started.
Dec 27 13:27:15 nb100 apm: BIOS not found.
Dec 27 13:27:15 nb100 audit: initializing netlink socket (disabled)
Dec 27 13:27:15 nb100 type=2000 audit(1230384408.582:1): initialized
Dec 27 13:27:15 nb100 highmem bounce pool size: 64 pages
Dec 27 13:27:15 nb100 HugeTLB registered 4 MB page size, pre-allocated 0 pages
Dec 27 13:27:15 nb100 VFS: Disk quotas dquot_6.5.1
Dec 27 13:27:15 nb100 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dec 27 13:27:15 nb100 squashfs: version 3.4 (2008/08/26) Phillip Lougher
Dec 27 13:27:15 nb100 msgmni has been set to 1739
Dec 27 13:27:15 nb100 alg: No test for stdrng (krng)
Dec 27 13:27:15 nb100 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Dec 27 13:27:15 nb100 io scheduler noop registered
Dec 27 13:27:15 nb100 io scheduler anticipatory registered (default)
Dec 27 13:27:15 nb100 io scheduler deadline registered
Dec 27 13:27:15 nb100 io scheduler cfq registered
Dec 27 13:27:15 nb100 pci 0000:00:02.0: Boot video device
Dec 27 13:27:15 nb100 pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
Dec 27 13:27:15 nb100 ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Dec 27 13:27:15 nb100 ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c377ac), AE_ALREADY_EXISTS
Dec 27 13:27:15 nb100 ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Dec 27 13:27:15 nb100 ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Dec 27 13:27:15 nb100 ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c377ac), AE_ALREADY_EXISTS
Dec 27 13:27:15 nb100 pcieport-driver 0000:00:1c.0: setting latency timer to 64
Dec 27 13:27:15 nb100 pcieport-driver 0000:00:1c.0: found MSI capability
Dec 27 13:27:15 nb100 pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
Dec 27 13:27:15 nb100 pci_express 0000:00:1c.0:pcie00: allocate port service
Dec 27 13:27:15 nb100 pci_express 0000:00:1c.0:pcie02: allocate port service
Dec 27 13:27:15 nb100 pci_express 0000:00:1c.0:pcie03: allocate port service
Dec 27 13:27:15 nb100 pcieport-driver 0000:00:1c.1: setting latency timer to 64
Dec 27 13:27:15 nb100 pcieport-driver 0000:00:1c.1: found MSI capability
Dec 27 13:27:15 nb100 pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
Dec 27 13:27:15 nb100 pci_express 0000:00:1c.1:pcie00: allocate port service
Dec 27 13:27:15 nb100 pci_express 0000:00:1c.1:pcie02: allocate port service
Dec 27 13:27:15 nb100 pci_express 0000:00:1c.1:pcie03: allocate port service
Dec 27 13:27:15 nb100 intel_rng: FWH not detected
Dec 27 13:27:15 nb100 Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Dec 27 13:27:15 nb100 brd: module loaded
Dec 27 13:27:15 nb100 loop: module loaded
Dec 27 13:27:15 nb100 input: Macintosh mouse button emulation as /class/input/input0
Dec 27 13:27:15 nb100 Uniform Multi-Platform E-IDE driver
Dec 27 13:27:15 nb100 piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
Dec 27 13:27:15 nb100 PIIX_IDE 0000:00:1f.1: can't derive routing for PCI INT A
Dec 27 13:27:15 nb100 piix 0000:00:1f.1: IDE port disabled
Dec 27 13:27:15 nb100 piix 0000:00:1f.1: not 100% native mode: will probe irqs later
Dec 27 13:27:15 nb100 ide0: BM-DMA at 0x40c0-0x40c7
Dec 27 13:27:15 nb100 Probing IDE interface ide0...
Dec 27 13:27:15 nb100 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 27 13:27:15 nb100 Loading iSCSI transport class v2.0-870.
Dec 27 13:27:15 nb100 Driver 'sd' needs updating - please use bus_type methods
Dec 27 13:27:15 nb100 Driver 'sr' needs updating - please use bus_type methods
Dec 27 13:27:15 nb100 ahci 0000:00:1f.2: version 3.0
Dec 27 13:27:15 nb100 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Dec 27 13:27:15 nb100 ahci 0000:00:1f.2: irq 2301 for MSI/MSI-X
Dec 27 13:27:15 nb100 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
Dec 27 13:27:15 nb100 ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
Dec 27 13:27:15 nb100 ahci 0000:00:1f.2: setting latency timer to 64
Dec 27 13:27:15 nb100 scsi0 : ahci
Dec 27 13:27:15 nb100 scsi1 : ahci
Dec 27 13:27:15 nb100 scsi2 : ahci
Dec 27 13:27:15 nb100 scsi3 : ahci
Dec 27 13:27:15 nb100 ata1: SATA max UDMA/133 abar m1024@0x54344000 port 0x54344100 irq 2301
Dec 27 13:27:15 nb100 ata2: DUMMY
Dec 27 13:27:15 nb100 ata3: DUMMY
Dec 27 13:27:15 nb100 ata4: DUMMY
Dec 27 13:27:15 nb100 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 27 13:27:15 nb100 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Dec 27 13:27:15 nb100 ata1.00: ATA-8: TOSHIBA MK1252GSX, ......, max UDMA/100
Dec 27 13:27:15 nb100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 27 13:27:15 nb100 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Dec 27 13:27:15 nb100 ata1.00: configured for UDMA/100
Dec 27 13:27:15 nb100 scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1252GS ... PQ: 0 ANSI: 5
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Write Protect is off
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Write Protect is off
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 27 13:27:15 nb100 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
Dec 27 13:27:15 nb100 sd 0:0:0:0: [sda] Attached SCSI disk
Dec 27 13:27:15 nb100 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Dec 27 13:27:15 nb100 i8042.c: Detected active multiplexing controller, rev 1.1.
Dec 27 13:27:15 nb100 serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 27 13:27:15 nb100 serio: i8042 AUX0 port at 0x60,0x64 irq 12
Dec 27 13:27:15 nb100 serio: i8042 AUX1 port at 0x60,0x64 irq 12
Dec 27 13:27:15 nb100 serio: i8042 AUX2 port at 0x60,0x64 irq 12
Dec 27 13:27:15 nb100 serio: i8042 AUX3 port at 0x60,0x64 irq 12
Dec 27 13:27:15 nb100 mice: PS/2 mouse device common for all mice
Dec 27 13:27:15 nb100 cpuidle: using governor ladder
Dec 27 13:27:15 nb100 TCP cubic registered
Dec 27 13:27:15 nb100 NET: Registered protocol family 17
Dec 27 13:27:15 nb100 Using IPI No-Shortcut mode
Dec 27 13:27:15 nb100 registered taskstats version 1
Dec 27 13:27:15 nb100 input: AT Translated Set 2 keyboard as /class/input/input1
Dec 27 13:27:15 nb100 Synaptics Touchpad, model: 1, fw: 7.0, ..............
Dec 27 13:27:15 nb100 input: SynPS/2 Synaptics TouchPad as /class/input/input2
Dec 27 13:27:15 nb100 kjournald starting.  Commit interval 5 seconds
Dec 27 13:27:15 nb100 EXT3-fs: mounted filesystem with ordered data mode.
Dec 27 13:27:15 nb100 VFS: Mounted root (ext3 filesystem) readonly.
Dec 27 13:27:15 nb100 Freeing unused kernel memory: 340k freed
Dec 27 13:27:15 nb100 EXT3 FS on sda2, internal journal
Dec 27 13:27:15 nb100 ACPI: SSDT 3F680C90, 023F (r2  PmRef  Cpu0Ist     3000 INTL 20051117)
Dec 27 13:27:15 nb100 ACPI: SSDT 3F67FE10, 01C1 (r2  PmRef  Cpu0Cst     3001 INTL 20051117)
Dec 27 13:27:15 nb100 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Dec 27 13:27:15 nb100 processor ACPI_CPU:00: registered as cooling_device0
Dec 27 13:27:15 nb100 ACPI: Processor [CPU0] (supports 8 throttling states)
Dec 27 13:27:15 nb100 ACPI: SSDT 3F680F10, 00D0 (r2  PmRef  Cpu1Ist     3000 INTL 20051117)
Dec 27 13:27:15 nb100 ACPI: SSDT 3F67EF10, 0083 (r2  PmRef  Cpu1Cst     3000 INTL 20051117)
Dec 27 13:27:15 nb100 Marking TSC unstable due to TSC halts in idle
Dec 27 13:27:15 nb100 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Dec 27 13:27:15 nb100 processor ACPI_CPU:01: registered as cooling_device1
Dec 27 13:27:15 nb100 ACPI: Processor [CPU1] (supports 8 throttling states)
Dec 27 13:27:15 nb100 thermal LNXTHERM:01: registered as thermal_zone0
Dec 27 13:27:15 nb100 ACPI: Transitioning device [FAN] to D3
Dec 27 13:27:15 nb100 ACPI: Thermal Zone [THRM] (51 C)
Dec 27 13:27:15 nb100 acpi device:12: registered as cooling_device2
Dec 27 13:27:15 nb100 input: Video Bus as /class/input/input3
Dec 27 13:27:15 nb100 ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Dec 27 13:27:15 nb100 fan PNP0C0B:00: registered as cooling_device3
Dec 27 13:27:15 nb100 ACPI: Fan [FAN] (on)
Dec 27 13:27:15 nb100 input: Power Button (FF) as /class/input/input4
Dec 27 13:27:15 nb100 ACPI: Power Button (FF) [PWRF]
Dec 27 13:27:15 nb100 input: Power Button (CM) as /class/input/input5
Dec 27 13:27:15 nb100 ACPI: Power Button (CM) [PWRB]
Dec 27 13:27:15 nb100 input: Lid Switch as /class/input/input6
Dec 27 13:27:15 nb100 ACPI: Lid Switch [LID0]
Dec 27 13:27:15 nb100 ACPI: Battery Slot [BAT0] (battery present)
Dec 27 13:27:15 nb100 ACPI: AC Adapter [ADP0] (on-line)
Dec 27 13:27:15 nb100 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
Dec 27 13:27:15 nb100 iTCO_vendor_support: vendor-support=0
Dec 27 13:27:15 nb100 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
Dec 27 13:27:15 nb100 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
Dec 27 13:27:15 nb100 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Dec 27 13:27:15 nb100 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Dec 27 13:27:15 nb100 r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 27 13:27:15 nb100 r8169 0000:01:00.0: setting latency timer to 64
Dec 27 13:27:15 nb100 r8169 0000:01:00.0: irq 2300 for MSI/MSI-X
Dec 27 13:27:15 nb100 eth0: RTL8102e at 0xf7c7e000, ..................
Dec 27 13:27:15 nb100 cfg80211: Calling CRDA to update world regulatory domain
Dec 27 13:27:15 nb100 ath5k_pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec 27 13:27:15 nb100 ath5k_pci 0000:02:00.0: setting latency timer to 64
Dec 27 13:27:15 nb100 ath5k_pci 0000:02:00.0: registered as 'phy0'
Dec 27 13:27:15 nb100 phy0: Selected rate control algorithm 'pid'
Dec 27 13:27:15 nb100 ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Dec 27 13:27:15 nb100 nf_conntrack version 0.5.0 (16240 buckets, 64960 max)
Dec 27 13:27:15 nb100 CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Dec 27 13:27:15 nb100 nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Dec 27 13:27:15 nb100 sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Dec 27 13:27:15 nb100 usbcore: registered new interface driver usbfs
Dec 27 13:27:15 nb100 usbcore: registered new interface driver hub
Dec 27 13:27:15 nb100 usbcore: registered new device driver usb
Dec 27 13:27:15 nb100 uhci_hcd: USB Universal Host Controller Interface driver
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.0: setting latency timer to 64
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.0: irq 21, io base 0x000040a0
Dec 27 13:27:15 nb100 usb usb1: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 hub 1-0:1.0: USB hub found
Dec 27 13:27:15 nb100 hub 1-0:1.0: 2 ports detected
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.1: setting latency timer to 64
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004080
Dec 27 13:27:15 nb100 usb usb2: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 hub 2-0:1.0: USB hub found
Dec 27 13:27:15 nb100 hub 2-0:1.0: 2 ports detected
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.2: setting latency timer to 64
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00004060
Dec 27 13:27:15 nb100 usb usb3: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 hub 3-0:1.0: USB hub found
Dec 27 13:27:15 nb100 hub 3-0:1.0: 2 ports detected
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.3: setting latency timer to 64
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.3: UHCI Host Controller
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Dec 27 13:27:15 nb100 uhci_hcd 0000:00:1d.3: irq 23, io base 0x00004040
Dec 27 13:27:15 nb100 usb usb4: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 hub 4-0:1.0: USB hub found
Dec 27 13:27:15 nb100 hub 4-0:1.0: 2 ports detected
Dec 27 13:27:15 nb100 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 27 13:27:15 nb100 Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: setting latency timer to 64
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: debug port 1
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: irq 21, io mem 0x54344400
Dec 27 13:27:15 nb100 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Dec 27 13:27:15 nb100 usb usb5: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 hub 5-0:1.0: USB hub found
Dec 27 13:27:15 nb100 hub 5-0:1.0: 8 ports detected
Dec 27 13:27:15 nb100 Linux agpgart interface v0.103
Dec 27 13:27:15 nb100 agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Dec 27 13:27:15 nb100 agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Dec 27 13:27:15 nb100 agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Dec 27 13:27:15 nb100 usb 5-7: new high speed USB device using ehci_hcd and address 2
Dec 27 13:27:15 nb100 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Dec 27 13:27:15 nb100 HDA Intel 0000:00:1b.0: setting latency timer to 64
Dec 27 13:27:15 nb100 usb 5-7: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 usb 5-8: new high speed USB device using ehci_hcd and address 3
Dec 27 13:27:15 nb100 Linux video capture interface: v2.00
Dec 27 13:27:15 nb100 uvcvideo: Found UVC 1.00 device CNF8029 (04f2:b135)
Dec 27 13:27:15 nb100 input: CNF8029 as /class/input/input7
Dec 27 13:27:15 nb100 usbcore: registered new interface driver uvcvideo
Dec 27 13:27:15 nb100 USB Video Class driver (v0.1.0)
Dec 27 13:27:15 nb100 usb 5-8: configuration #1 chosen from 1 choice
Dec 27 13:27:15 nb100 Initializing USB Mass Storage driver...
Dec 27 13:27:15 nb100 scsi4 : SCSI emulation for USB Mass Storage devices
Dec 27 13:27:15 nb100 usbcore: registered new interface driver usb-storage
Dec 27 13:27:15 nb100 USB Mass Storage support registered.
Dec 27 13:27:15 nb100 usb-storage: device found at 3
Dec 27 13:27:15 nb100 usb-storage: waiting for device to settle before scanning
Dec 27 13:27:15 nb100 kjournald starting.  Commit interval 5 seconds
Dec 27 13:27:15 nb100 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 27 13:27:15 nb100 EXT3 FS on sda9, internal journal
Dec 27 13:27:15 nb100 EXT3-fs: mounted filesystem with ordered data mode.
Dec 27 13:27:15 nb100 kjournald starting.  Commit interval 5 seconds
Dec 27 13:27:15 nb100 EXT3 FS on sda3, internal journal
Dec 27 13:27:15 nb100 EXT3-fs: mounted filesystem with ordered data mode.
Dec 27 13:27:15 nb100 kjournald starting.  Commit interval 5 seconds
Dec 27 13:27:15 nb100 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 27 13:27:15 nb100 EXT3 FS on sda8, internal journal
Dec 27 13:27:15 nb100 EXT3-fs: mounted filesystem with ordered data mode.
Dec 27 13:27:15 nb100 kjournald starting.  Commit interval 5 seconds
Dec 27 13:27:15 nb100 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 27 13:27:15 nb100 EXT3 FS on loop0, internal journal
Dec 27 13:27:15 nb100 EXT3-fs: mounted filesystem with ordered data mode.
Dec 27 13:27:15 nb100 Adding 497972k swap on /dev/sda5.  Priority:-1 extents:1 across:497972k
Dec 27 13:27:15 nb100 usb-storage: device scan complete
Dec 27 13:27:15 nb100 scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
Dec 27 13:27:15 nb100 sd 4:0:0:0: [sdb] Attached SCSI removable disk
Dec 27 13:27:15 nb100 sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 27 13:27:15 nb100 sd 4:0:0:0: Attached scsi generic sg1 type 0
Dec 27 13:27:15 nb100 acpid: starting up
Dec 27 13:27:15 nb100 acpid: 1 rule loaded
Dec 27 13:27:16 nb100 ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 27 13:27:19 nb100 rc-scripts: WARNING:  netmount is scheduled to start when net.wlan0 has started.
Dec 27 13:27:20 nb100 sshd[3122]: Server listening on 0.0.0.0 port 22.
Dec 27 13:27:21 nb100 acpid: client connected from 3218[0:0]
Dec 27 13:27:21 nb100 acpid: 1 client rule loaded
Dec 27 13:27:24 nb100 wlan0: direct probe to AP ............... try 1
Dec 27 13:27:25 nb100 wlan0 direct probe responded
Dec 27 13:27:25 nb100 wlan0: authenticate with AP ...............
Dec 27 13:27:25 nb100 wlan0: authenticated
Dec 27 13:27:25 nb100 wlan0: associate with AP ...............
Dec 27 13:27:25 nb100 wlan0: RX AssocResp from ...............
Dec 27 13:27:25 nb100 wlan0: associated
Dec 27 13:27:25 nb100 [drm] Initialized drm 1.1.0 20060810
Dec 27 13:27:25 nb100 padlock: VIA PadLock not detected.
Dec 27 13:27:25 nb100 modprobe: WARNING: Error inserting padlock_aes (/lib/modules/2.6.28-gentoo/kernel/drivers/crypto/padlock-aes.ko): No such
Dec 27 13:27:25 nb100 pci 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec 27 13:27:25 nb100 pci 0000:00:02.0: setting latency timer to 64
Dec 27 13:27:25 nb100 [drm] Initialized i915 1.6.0 20080730 on minor 0
Dec 27 13:27:25 nb100 wpa_cli: interface wlan0 CONNECTED
Dec 27 13:27:26 nb100 evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbi

Podpora je od kernelu 2.6.28, testoval jsem v Gentoo s sys-kernel/gentoo-sources-2.6.28, s sys-kernel/gentoo-sources-2.6.27-r7 jeste nefungovala zvukovka.

Funguje bez problemu, vcetne suspend to RAM. Dokonce funguje pres Fn+Fi on/off WiFi+BT, on/off vetraku, nastaveni jasu displeje, a to dokonce bez daemona fnfxd, otazka je, jak je to resene.

Ubuntu 9.04 - Funguje vše hned po instalaci včetně funkčních kláves, scrollu u touchpadu, webkamery.... Podsvícení lcd lze řídit i pomocí appletu "jas"

Mechanicky reseny na svou cenu dost dobre. K otevreni jsou potreba obe ruce. Klavesnice vzhledem k rozmerum omezena, viz parametry.

Displej lze vyklápět o 180 stupňů.

Lze bootovat z USB zařízení (flashdisk, usb fdd, usb hdd, usb cdrom) i sítě - krom usb fdd vše vyzkoušeno.

+ předimenzovaný napájecí adaptér jaký se dodává pro standardní notebooky.

Po vypnutí ventilátoru pomocí kombinace funkčních kláves dojde k poklesu výkonu - toto je řešeno již na úrovni hardwaru - operační systém na to nemá vliv.

Bluetooth se zapíná zarás s wifi - možná zbytečně zvyšuje spotřebu.