IBM pc server 310

P133, 32MB RAM, 522MB HD, SCSI2... Více viz zde.

dmesg:

OpenBSD 3.1 (GENERIC) #59: Sat Apr 13 15:28:52 MDT 2002
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 33140736 (32364K)
avail mem = 25202688 (24612K)
using 430 buffers containing 1761280 bytes (1720K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/07/96, BIOS32 rev. 0 @ 0xfd971
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371SB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xcc800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x03
pcib0 at pci0 dev 1 function 0 "Intel 82371SB PCI-ISA" rev 0x01
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: irq 15
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xl0 at pci0 dev 6 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 14 address 00:04:76:18:9a:82
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci0 dev 7 function 0 "3Com 3c900B 10Mbps-Combo" rev 0x04: irq 11 address 00:01:02:0c:28:33
xl1: selecting 10baseT transceiver, half duplex
vga1 at pci0 dev 8 function 0 "S3 Trio32/64" rev 0x54
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahc1 at pci0 dev 11 function 0 "Adaptec AHA-2940U" rev 0x00: irq 10
ahc1: Single Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 8 targets
ahc1: target 6 synchronous at 10.0MHz, offset = 0xf
ahc1: target 6 using tagged queuing
sd0 at scsibus0 targ 6 lun 0:  SCSI2 0/direct fixed
sd0: 522MB, 3875 cyl, 3 head, 92 sec, 512 bytes/sec, 1070496 sec total
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8440 netmask cc40 ttymask dc42
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: /mnt was not properly unmounted

OpenBSD 3.1 naprosto bez problémů. Server má raději SCSI, řadič IDE disků integrován není.

Server používám jako firewall k Internetu, výkon naprosto dostačuje. Jediná vada na kráse je v hlučnosti disku; pokud někdo náhodou víte, jak uspat SCSI disk, dejte mi vědět. Díky