Portál AbcLinuxu, 1. května 2025 17:42
Podpora: | kompletní |
Ovladač: | dodává výrobce |
200MHz CPU ARM9 32/64MB RAM 32/128MB NAND Flash PC/104 bus, SPI bus, 20 DIO 10/100 PCI Ethernet 2x USB Host 1x RS485, 1x RS232 RTC 12bit A/D RoHS kernel 2.4 dodává výrobce
Linux version 2.4.26-ts9 (root@marvin) (gcc version 3.3) #5 Po čen 18 11:35:56 C EST 2007 CPU: Arm920Tid(wb) revision 0 Machine: ep9301 On node 0 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. On node 1 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. On node 2 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. On node 3 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyAM0,115200 ip=dhcp root=/dev/mtdblock1 devfs=nom ount Relocating machine vectors to 0xffff0000 Calibrating delay loop... 99.94 BogoMIPS Memory: 8MB 8MB 8MB 8MB = 32MB total Memory: 28796KB available (1095K code, 302K data, 52K init) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) CPU: Testing write buffer: pass POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA pty: 1024 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled Real Time Clock Driver v1.10f ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic about to do sbc_setinfo Searching for NANDNAND device: Manufacturer ID: 0x20, Chip ID: 0x75 (ST Micro NAND 32MiB 3,3V 8-bi t) Scanning device for bad blocks Using static partition definition Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": 0x00000000-0x00004000 : "TS-BOOTROM" 0x00004000-0x01d04000 : "Linux" 0x01d04000-0x02000000 : "RedBoot" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) enable_irq(39) unbalanced from c02b7864 Sending DHCP requests .., OK IP-Config: Got DHCP answer from 192.168.4.11, my address is 192.168.4.17 IP-Config: Complete: device=eth0, addr=192.168.4.17, mask=255.255.255.0, gw=192.168.4.1, host=192.168.4.17, domain=xxxxxxxx.cz, nis-domain=(none), bootserver=192.168.4.11, rootserver=192.168.4.11, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.97 (double precision) yaffs: Attempting MTD mount on 31.1, "1f:01" VFS: Mounted root (yaffs filesystem). Freeing init memory: 52K flash...
Dokument vytvořil: Daniel Smolik, 16.1.2008 13:58 | Poslední úprava: Fluttershy, yay!, 27.2.2011 15:09 | Historie změn | Zobrazeno: 2597×
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.