Teac PD-518E

IDE rozhranie
CDROM citanie 8x
Zapis na PD cartridge 2x
Cita CD-RW

/proc/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TEAC Model: PD-1 PD-518E Rev: 1.0E
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: TEAC Model: PD-1 PD-518E Rev: 1.0E
Type: Optical Device ANSI SCSI revision: 02

Vypis pri starte systemu:

ide: i82371 PIIX (Triton) on PCI bus 0 function 33
ide0: BM-DMA at 0xd800-0xd807
ide1: BM-DMA at 0xd808-0xd80f
hda: WDC AC26400B, 6149MB w/512kB Cache, CHS=784/255/63, UDMA
hdb: TEAC PD-1 PD-518E, ATAPI CDROM drive - enabling SCSI emulation
ATAPI overlap supported: No
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: TEAC Model: PD-1 PD-518E Rev: 1.0E
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: TEAC Model: PD-1 PD-518E Rev: 1.0E
Type: Optical Device ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 1
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
sda : extended sense code = 2
sda : block size assumed to be 512 bytes, disk size 1GB.

Treba v jadre:
- povolit emulaciu SCSI pre IDE
- zakazat podporu IDE/ATAPI CDROM
- Povolit podporu pre SCSI disk a SCSI CDROM
- Povolit multiply LUNs
Popis nastavenia parametrov a prekladu jadra v /usr/src/linux/README


Parametre v /usr/src/linux/.config dolezite pre konfiguraciu PD-CDROM
Vyskusane pre jadro 2.0.36 z distribucie RedHat 5.2 a Mandrake 5.3
uprava cez make config alebo make xconfig
#
# Floppy, IDE, and other block devices
#
# CONFIG_BLK_DEV_IDECD is not set <--IDE/ATAPI CDROM support NO
CONFIG_BLK_DEV_IDESCSI=y <--SCSI emulation suppport YES

#
# SCSI support
#
CONFIG_SCSI=y <--SCSI support YES

CONFIG_BLK_DEV_SD=y <--SCSI disk support YES
CONFIG_BLK_DEV_SR=y <--SCSI CDROM support YES
CONFIG_SCSI_MULTI_LUN=y <--Probe all LUNs on each SCSI device YES

PD/CDROM pracuje podla typu vlozeneho media bud ako CDROM alebo ako opticky disk. CDROM pracuje ako zariadenie /dev/scd0, nie /dev/sr0 ako sa vypisuje po starte. PD cartridge pracuje pod /dev/sda. Pracuje s ext2 aj vfat. Je dobre pokial sa nezapisuje na PD cartridge montovat ho s parametrom read only. Medium ma zivotnost 500 000 zapisov a UNIX-y pomerne casto zapisuju udaje do super bloku namontovanych zariadeni. Zbytocne by sa znizila zivotnost media. Viac v Optical-Disk-HOWTO.