Maxtor 6Y080L0 80GB

cat /proc/ide/hda/model
Maxtor 6Y080L0

hdparm /dev/hda

/dev/hda:
 multcount    = 16 (on)
 IO_support   =  1 (32-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 65535/16/63, sectors = 160086528, start = 0

hdparm -i /dev/hda

/dev/hda:

 Model=Maxtor 6Y080L0, FwRev=YAR41VW0, SerialNo=Y30BLRLE
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 udma2 
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: (null): 

 * signifies the current active mode

cat dmesg | grep hda:

hda: Maxtor 6Y080L0, ATA DISK drive
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported

podporuje acoustic management

hdparm -M 128 /dev/hda - ticho

hdparm -M 254 /dev/hda - vykon

hdparm -M 0 /dev/hda - vypnout

podporuje měření teploty

hddtemp /dev/hda
/dev/hda: Maxtor 6Y080L0: 42°C

rychlost

hdparm -Tt /dev/hda

/dev/hda:
 Timing buffer-cache reads:   2332 MB in  2.00 seconds = 1165.59 MB/sec
 Timing buffered disk reads:  142 MB in  3.02 seconds =  47.07 MB/sec