SAMSUNG SV6003H

Samsung SpinPoint V40 series
117304992 sectors (60060 MB) w/1945KiB Cache, CHS=116374/16/63, UDMA(100), 5400RPM

http://www.samsunghdd.com
http://samsungelectronics.com/hdd/sv6003h.html

hdparm -i /dev/hda:
 Model=SAMSUNG SV6003H, FwRev=QQ100-07, SerialNo=0420J1FRB25024
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=38997, SectSize=619, ECCbytes=4
 BuffType=DualPortCache, BuffSize=1945kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117304992
 IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
 AdvancedPM=no WriteCache=enabled
 Drive Supports : fastATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6

hdparm -I /dev/hda:
non-removable ATA device, with non-removable media
        Model Number:           SAMSUNG SV6003H
        Serial Number:          0420J1FRB25024
        Firmware Revision:      QQ100-07
Standards:
        Supported: 1 2 3 4 5 6
        Likely used: 6
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        bytes/track:    38997           (obsolete)
        bytes/sector:   619             (obsolete)
        current sector capacity: 16514064
        LBA user addressable sectors = 117304992
Capabilities:
        LBA, IORDY(cannot be disabled)
        Buffer size: 1945.0kB   ECC bytes: 4    Queue depth: 1
        Standby timer values: spec'd by standard, no device specific minimum
        r/w multiple sector transfer: Max = 16  Current = 16
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    NOP cmd
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
           *    look-ahead
           *    write cache
           *    Power Management feature set
                Security Mode feature set
           *    SMART feature set
                SET MAX security extension
           *    DOWNLOAD MICROCODE cmd
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
                supported: enhanced erase
        30min for SECURITY ERASE UNIT. 30min for ENHANCED SECURITY ERASE UNIT.
HW reset results:
        CBLID- above Vih
        Device num = 0 determined by the jumper
Checksum: correct