Kingston SSD 160GB 2,5"

Identifikace pod Linuxem

ata2.01: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
scsi 3:0:1:0: Direct-Access     ATA      INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5


hdparm -i /dev/sdb

/dev/sdb:

 Model=INTEL SSDSA2M160G2GC                    , FwRev=2CV102HD, SerialNo=CVPO0072008Y160AGN
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=?16?
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=312581808
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: ATA/ATAPI-7 T13 1532D revision 1:  ATA/ATAPI-2,3,4,5,6,7

 * signifies the current active mode

Poznámka

hdparm -Tt /dev/sdb

/dev/sdb:
 Timing cached reads:   1304 MB in  2.00 seconds = 652.01 MB/sec
 Timing buffered disk reads:  552 MB in  3.33 seconds = 165.82 MB/sec