SSD OCZ Agility 3 120GB SATA3

dhcppc9:~ # hdparm -Tt --verbose /dev/sda

/dev/sda:
 Timing cached reads:   24552 MB in  2.00 seconds = 12288.81 MB/sec
 Timing buffered disk reads: 736 MB in  3.00 seconds = 244.97 MB/sec
dhcppc9:~ # hdparm -Tt --verbose /dev/sda

/dev/sda:
 Timing cached reads:   24586 MB in  2.00 seconds = 12305.35 MB/sec
 Timing buffered disk reads: 738 MB in  3.01 seconds = 245.42 MB/sec
dhcppc9:~ # hdparm -Tt /dev/sda

/dev/sda:
 Timing cached reads:   24250 MB in  2.00 seconds = 12137.31 MB/sec
 Timing buffered disk reads: 736 MB in  3.00 seconds = 244.98 MB/sec

dhcppc9:~ # hdparm -i /dev/sda

/dev/sda:

 Model=OCZ-AGILITY3, FwRev=2.15, SerialNo=OCZ-3W17E1197QC92G7L
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
 AdvancedPM=yes: unknown setting WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-2,3,4,5,6,7

 * signifies the current active mode