Apacer USB ctecka karet CF+SM

Ovladač:

v jádře

Technické parametry

prevodnik z USB na CF a SD

USB 1.1 ctecka karet SmartMedia, CompactFlash a IBM microdrive.

http://www.apacer.com/product/flash/usb.htm
http://www.datafabusa.com/productpage/pocfsm-usb.htm

Identifikace pod Linuxem

lsusb:
Bus 001 Device 009: ID 07c4:a109 DataFab Systems, Inc. LC1 CompactFlash & SmartMedia Card Reader
string descriptor 1 invalid (bf bf; len=0)
cannot get string descriptor 2, error = Invalid or incomplete multibyte or wide
character(84)
cannot get string descriptor 3, error = Invalid or incomplete multibyte or wide
character(84)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x07c4 DataFab Systems, Inc.
  idProduct          0xa109 LC1 CompactFlash & SmartMedia Card Reader
  bcdDevice           80.00
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
cannot get config descriptor 0, Invalid or incomplete multibyte or wide character (84)
  Language IDs: none (cannot get min. string descriptor; got len=-1, error=84:Invalid or incomplete multibyte or wide character)

Postup zprovoznění pod Linuxem

v jadre 2.4.19

(M) usb-storage 
 + Fatafab SmartMedia ... (presne si nepamatuji nazev)

(M) scsi disk

po vlozeni modulu pribydou 2 disky (oznaceni na mem systemu, muze byt posunute)
sda:CF slot a sdb: SD slot
Zrada! ono pribydou 2 SCSI disky, ale oba "vedou" na CF slot
pokud je vlozena SM karta, tak to NEFUNFUJE -> pod linuxem je mozno pouzivat (zatim?) pouze CF slot

pak mount /dev/sd[a,b]1 /mnt/cosi -t (vetsinou vfat)

zatim mi na Linuxu NEFUNGUJE!

Poznámka

Vyrabi firma DataFab (napriklad www.datafabusa.com), na krabcce je jen nalepka Apacer :-)

Testovano s MDK 8.2, kernel 2.4.18mdk