HandyDrive 64MB
| Ovladač: | v jádře |
Technické parametry
64 MB RAM
17 gramu
USB storage class 1read >750KB/s, write >450KB/s
shock resistance: 1000G
8MB az 1GB memory - ja mam 64 MB.
USB storage class
vfat file system - neskusal som ho menit
Apacer Handydrive, 128 Mb, asi 15g. Dodava se i s prodluzovacim kablikem s originalni kolibkou.
17 gramu
USB storage class 1read >750KB/s, write >450KB/s
shock resistance: 1000G
8MB az 1GB memory - ja mam 64 MB.
USB storage class
vfat file system - neskusal som ho menit
Apacer Handydrive, 128 Mb, asi 15g. Dodava se i s prodluzovacim kablikem s originalni kolibkou.
Ovladace nutne pouze do win 98, pak se stejne jako v NT, 2000, XP pripoji automaticky po vlozeni do USB portu. V linuxu podpora od jadra 2.4.0
Identifikace pod Linuxem
/proc/bus/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0d7d ProdID=0100 Rev= 1.00
S: Manufacturer=Apacer
S: Product=HandyDrive
S: SerialNumber=191B0308013A
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=255ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=255ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl= 1ms
dmesg:
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0xd7d/0x100) is not claimed by any active driver.Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Apacer Model: HandyDrive Rev: 1.05
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0d7d ProdID=0100 Rev= 1.00
S: Manufacturer=Apacer
S: Product=HandyDrive
S: SerialNumber=191B0308013A
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=255ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=255ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl= 1ms
dmesg:
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0xd7d/0x100) is not claimed by any active driver.Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Apacer Model: HandyDrive Rev: 1.05
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
lsmod: Module Size Used by Tainted: P usb-uhci 21516 0 (unused) nls_iso8859-1 2844 2 (autoclean) sd_mod 10060 2 (autoclean) vfat 9532 1 (autoclean) fat 29752 0 (autoclean) [vfat] usb-storage 43124 1 usbcore 35488 0 [usb-uhci usb-storage] scsi_mod 81752 2 [sd_mod usb-storage] NVdriver 988544 10 rtc 5948 0 (autoclean)
dmesg (po modprobe usb-uhci):
usb-uhci.c: $Revision: 1.275 $ time 20:37:40 Jan 28 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
PCI: Sharing IRQ 9 with 00:07.3
PCI: Sharing IRQ 9 with 00:0c.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:07.3
PCI: Sharing IRQ 9 with 00:07.2
PCI: Sharing IRQ 9 with 00:0c.0
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 62
usb-storage: Array length appears to be: 64
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xd2566d40
Out: 0xd2566d54 Int: 0xd2566d68 (Period 1)
usb-storage: Found existing GUID 0d7d01000000192a160b01ec
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
cat /proc/scsi/scsi: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: Apacer Model: HandyDrive Rev: 2.08 Type: Direct-Access ANSI SCSI revision: 02
Postup zprovoznění pod Linuxem
Pouze pod 2.4.0 a vyšší.
Potřebujete tyto moduly:
usb-storage
usbcore
scsi_mod
Pak klasický
mount /dev/sda1 /mnt/adresar, FS je Vfat
Na nekterych konfiguracich budete muset jeste nahrat modul usb-uhci a pripojit usbdevfs pomoci
mount usbdevfs -t usbdevfs /proc/bus/usb
Plati pre RedHat 7.2 - po zapojeni si sam natiahol moduly, zdetekoval, stacilo namontovat /dev/sda1
automaticke montovanie ktore spominal Leoš Literák
treba mat naistalovane autofs
v /etc/auto.master odstranit # pri riadku
/misc /etc/auto.misc --timeout=60
v /etc/auto.misc vytvorit riadok
handy -fstype=vfat,gid=600,umask=002 :/dev/sda1
pouzit prikaz
/etc/init.d/autofs start
ls /misc/handy - a HandyDrive je namontovany
po 60s necinnosti sa sam odmontuje - nesmie s nim nic pracovat.
Vytvoril som skupinu handy s ID 600, pridal do nej uzivatela pod ktorym sa hlasim. Spolu s umask parametrom zabezpeci ze na HandyDrive
moze zapisovat aj iny uzivatel ako root. Nechcem zbytocne pracovat ako root.
Pod debianem 3.0: Musel jsem zkompilovat nove jadro (standardne se instaluje 2.2.18, ktere nestaci). Pouzil jsem 2.4.19. Je dulezite zapnout podporu SCSI (emulaci) a USB (usbcore, usb-storage a usb-uhci). Usb-uhci je dulezite, kdyz jsem ho nedal, neslo to.
Potřebujete tyto moduly:
usb-storage
usbcore
scsi_mod
Pak klasický
mount /dev/sda1 /mnt/adresar, FS je Vfat
Na nekterych konfiguracich budete muset jeste nahrat modul usb-uhci a pripojit usbdevfs pomoci
mount usbdevfs -t usbdevfs /proc/bus/usb
Plati pre RedHat 7.2 - po zapojeni si sam natiahol moduly, zdetekoval, stacilo namontovat /dev/sda1
automaticke montovanie ktore spominal Leoš Literák
treba mat naistalovane autofs
v /etc/auto.master odstranit # pri riadku
/misc /etc/auto.misc --timeout=60
v /etc/auto.misc vytvorit riadok
handy -fstype=vfat,gid=600,umask=002 :/dev/sda1
pouzit prikaz
/etc/init.d/autofs start
ls /misc/handy - a HandyDrive je namontovany
po 60s necinnosti sa sam odmontuje - nesmie s nim nic pracovat.
Vytvoril som skupinu handy s ID 600, pridal do nej uzivatela pod ktorym sa hlasim. Spolu s umask parametrom zabezpeci ze na HandyDrive
moze zapisovat aj iny uzivatel ako root. Nechcem zbytocne pracovat ako root.
Pod debianem 3.0: Musel jsem zkompilovat nove jadro (standardne se instaluje 2.2.18, ktere nestaci). Pouzil jsem 2.4.19. Je dulezite zapnout podporu SCSI (emulaci) a USB (usbcore, usb-storage a usb-uhci). Usb-uhci je dulezite, kdyz jsem ho nedal, neslo to.
Pote
modprobe usb-storage modprobe usb-uhci mount /dev/sda1 /mnt/usbdisk -t vfat
Poznámka
No, myslel jsem, že to pod Mandrakem pojede jako pod windowsy: plug and use. Kdežto jsem musel modprobem nahrát moduly a pak to ručně namontovat. Ale stejně je to cool věcička.
Prvy krat som videl priamo v navode k zariadeniu spomenutu instalaciu pod Linuxom.
Funguje velice pekne a pro prenaseni dat i mezi ruznymi operacnimi systemy je idealni.
Prvy krat som videl priamo v navode k zariadeniu spomenutu instalaciu pod Linuxom.
Funguje velice pekne a pro prenaseni dat i mezi ruznymi operacnimi systemy je idealni.
