Minolta Dimage E203

Ovladač:

neexistuje

Technické parametry

2 Megapixel, 3x optický 2x digitální zoom, zápis na MMC/SD karty

Identifikace pod Linuxem

/proc/bus/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04c8 ProdID=0723 Rev= 1.00
S: Manufacturer=MINOLTA
S: Product=DiMAGE E203
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms

/var/log/messages
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: MINOLTA Model: DiMAGE E203 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 62405 512-byte hdwr sectors (32 MB)
Write Protect is off
sda:<7>usb-storage: queuecommand() called
sda1
USB Mass Storage support registered.

Postup zprovoznění pod Linuxem

Pod RH 7.2 je nadetekován v /proc/bus/usb/devices, ale není možne jej primountovat. Jak to tedy rozchodit:
1. Je nutné přidat zaznam do /usr/src/linux-2.x.x./drivers/usb/storage/unusual_devs.h a to:

UNUSUAL_DEV( 0x04c8, 0x0723, 0x0100, 0x0100, "Konica", "KD-200Z", US_SC_SCSI, US_PR_BULK, NULL, US_FL_START_STOP ),

2. Rekompilovat jadro
3. Pak už jenom stačí zadat
mount -t vfat /dev/sda1 /mnt/camera

Poznámka

S jádrem 2.4.21 už funguje bez problémů.