Genius NetScroll+ USB
| Ovladač: | v jádře |
Technické parametry
Mys s kolieckom ktore funguje aj ako tlacitko
Identifikace pod Linuxem
/proc/bus/usb/devices:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 2 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0458 ProdID=0003 Rev= 0.00
S: Manufacturer=KYE Systems
S: Product=Genius USB Wheel Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 2 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0458 ProdID=0003 Rev= 0.00
S: Manufacturer=KYE Systems
S: Product=Genius USB Wheel Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
Postup zprovoznění pod Linuxem
V distribucii Redhat 7.1 automaticka detekcia - uz pocas instalacie.
Zavest modul pro korenovy USB hub, dale usbmouse ??
Dnes ji uz nemam, nefungovala pod win95.
staci mit v jadre nasledujici podporu: # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # CONFIG_USB_KBD is not set CONFIG_USB_MOUSE=m # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set
Detekována automaticky, neměl jsem žádné problémy. Fungovala ihned po instalaci Red Hat 7.1. S jednou výjimkou viz níže.
Zavest modul pro korenovy USB hub, dale usbmouse ??
Dnes ji uz nemam, nefungovala pod win95.
staci mit v jadre nasledujici podporu: # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # CONFIG_USB_KBD is not set CONFIG_USB_MOUSE=m # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set
# Input core support # CONFIG_INPUT=m # CONFIG_INPUT_KEYBDEV is not set CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set
Moduly zavedte (treba automaticky hotplugem) a zarizeni /dev/input/mice komunikuje protokolem ImPS/2 (2.4.20)
Poznámka
Dobra velka mys. Koliecko sa otaca lahsie ako u ostatnych mysi - treba si zvyknut. Preco USB mys? IRQ12 zostane volne napriklad pre TV kartu 
Prostredni tlacitko fungovalo i pod XFree3.3.6
v distribuci Slackware 7.1
Kolečko ny myši mi fungovalo pouze jako třetí tlačítko. Toto se změnilo po přechodu z Xfree-3.3.6 na nová Xfree-4.1.0. Kolečko je již ve všech oknech plně funkční.
Prostredni tlacitko fungovalo i pod XFree3.3.6
v distribuci Slackware 7.1
