Trust 250S Wireless Optical

Bezdratova, opticka, 5tlacitok, koliecko NiMh akumulatory, dobija sa v prijimaci. PS/2->USB redukcia pribalena Symetricka - aj pre lavakov

/proc/bus/usb/devices:
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05fe ProdID=0011 Rev= 0.10
S:  Manufacturer=Cypress Sem.
S:  Product=PS2/USB Browser Combo Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl= 10ms

dmesg:
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x5fe/0x11) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input0: USB HID v1.00 Mouse [Cypress Sem. PS2/USB Browser Combo Mouse] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik 
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice

Pre RedHat - automaticka detekcia - USB 3button mouse nefunguju 2 tlacitka navyse - pre ich vyuzitie v XF86Config-4:

Section "InputDevice"
        Identifier      "Mouse0"
        # Modified by mouseconfig
        Driver          "mouse"
        Option          "Device"                "/dev/mouse"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "Emulate3Buttons"       "no"
        Option          "Buttons"               "7"
        Option          "ZAxisMapping"          "6 7"
EndSection

potom spustit:
xmodmap -e "pointer = 1 2 3 6 7 4 5"

xmodmap mam v ~/.kde/Autostart ako script. (treba dat #!/bin/sh na zaciatok inak to KDE otvori na editovanie

Velmi dobra mys - nie je rozdiel v reakciach oproti beznej mysi (ziadne oneskorenie) - testovane na hre Unreal. Po 10 minutach sa vypne - treba stacit tlacitko. Treba sa trochu starat o akumulatory. Silne svieti - pracuje aj na ciernom podklade (podlozka pod mys s povrchom z tkaniny)