ASUS P5A

100MHz sběrnice, AGP, USB, 2xISA, 5xPCI, 3xDIMM, ALI čipset, optional audio

Linux version 2.4.18-tamburina (root@tamburina)
(gcc version 2.96 20000731 (Red Hat Linux 7.1
2.96-98)) #1 So bře 23 01:03:34 EET 2002

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000001ffc000 (usable)
 BIOS-e820: 0000000001ffc000 - 0000000001fff000 (ACPI data)
 BIOS-e820: 0000000001fff000 - 0000000002000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 8188
zone(0): 4096 pages.
zone(1): 4092 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux_18 ro
root=301 BOOT_FILE=/boot/vmlinuz-2.4.18-tamburina
Initializing CPU#0
Detected 350.810 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 30000k/32752k available (1087k kernel code,
2364k reserved, 311k data, 216k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
Enabling new style K6 write allocation for 31 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU:             Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xf0560, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
ACPI: APM is already active, exiting
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 64 slots per queue, batch=16
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
PCI: No IRQ known for interrupt pin A of device
00:0f.0. Please try using pci=biosirq.
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL_TM1080A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: HITACHI CDR-7930, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 2128896 sectors (1090 MB) w/76KiB Cache, CHS=528/64/63, DMA
hdc: ATAPI 8X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 3M
agpgart: Detected Ali M1541 chipset
agpgart: AGP aperture is 16M @ 0xe6000000
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
Adding Swap: 40312k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 4.11 detected OK (220)
 at 0x220 irq 5 dma 1,5
eth0: 3c5x9 at 0x230, 10baseT port, address  xx xx xx xx xx xx, IRQ 11.
3c509.c:1.18a 17Nov2001becker@scyld.com
http://www.scyld.com/network/3c509.html
eth0: Setting Rx mode to 1 addresses.

Driver řadiče ALI je nutno přidat, nedetekuje se automaticky. Mám s tím ale problémy, nemůžu rozchodit UDMA (řadič podporuje 33), ale to může být způsobeno hardiskem. Bohužel zatím nemám AGP kartu, jinak bych něco napsal i o podpoře AGP. Mám kousek bez zvukovky a senzorů

V desce mám AMD K6-2 / 350 MHz a cele jsem to koupil za těžké prachy tady ve Finsku. Mám jen 1GB hardisk a 32MB paměti a Linux, a žiju v pohodě. Nainstalovaný je RedHat 7.2, jádro 2.4.18 viz dmesg. Nestěžuju si až na občasné nekonečné swapování. DivX zvládám vklidu (grafika 2MB S3 ViRGE/DX) a net v pokoji taky ujde(3c509).