Gigabyte GA-790FXTA-UD5

• Základní parametry
• Patice : AM3
• NorthBridge: AMD 790FX
• SouthBridge : AMD SB750
• Maximální frekvence systémové sběrnice : 5200MHz
• Paměti : 4x DDR3 1866MHz 1.5V DC (až 16GB i ECC)
• Procesor : až Phenom II X4 / X6
• Rozšiřující sloty
• 3x PCI-Express 16x
• 1x PCI-Express 1x
• 3x PCI
• Periferie
• 2x Glan
• 2x SATA6 (Marvell 9128)
• 6x SATA3
• 2x eSATA (JMicron JMB362)
• 3x Firewire (IEEE 1394 T.I. TSB43AB23)
• 10x USB 2.0
• 2x USB 3.0
• 1x IDE
• 1x FDD
• 1 x PS/2 keyboard port
• 1 x PS/2 mouse port
• 1 x optical S/PDIF Out connector
• 1 x coaxial S/PDIF out connector
• 6x audio jack (7.1) Realtek ALC889 codec
• Bios
• PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
• Podpora DualBIOS™
• 2 x 8 Mbit flash

0:00.0 Host bridge: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A)
00:05.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port B)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03)
03:00.0 SATA controller: Device 1b4b:9128 (rev 11)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
06:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
06:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
07:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

Vše je krásně v jádře. Se zapnutým automatickým načítáním modulů by neměl být problém.

• SATA - ahci
• IDE - pata_atiixp, pata_jmicron
• Glan - r8169
• Zvukovka - snd_hda_intel
• it87 - hw senzory
• firewire_ohci - firewire
• usb_ohci - pro usb

V biosu bych doporučil zapnout na řadiči, aby jel v režimu AHCI.
Aby se pěkně mixoval zvuk, doporučuji do domovského adresáře umístit nastavení pro alsu s využitím dmix pluginu (.asoundrc):

pcm.!default {
type plug
slave.pcm "dmix"
}
#
# Make OSS apps default to using dmix plugin too
pcm.dsp0 {
type plug
slave.pcm "dmix"
}
#
ctl.mixer0 {
type hw
card 0
}

Nezkoušel jsem USB3.0 (nemám na čem), nezkoušel jsem SATA6 (zatím taktéž nedisponuji takovým zařízením). A ještě by se něco našlo. Zatím používám jen běžné věci a naprostá spokojenost.