Intel® N440BX Server Board

Processor            Installed: Up to two Pentium® II processors, packaged in single edge contact
                     (S.E.C.) cartridges and installed in 242-pin Slot 1 processor connectors,
                     operating at 1.8 V to 3.5 V. The system board’s voltage regulator is
                     automatically programmed by the processor’s VID pins to provide the required
                     voltage.
Memory, dynamic      Four 72-bit sockets for 100 MHz, PC/100 compliant, ECC or non-ECC,
random access (DRAM) registered or unbuffered, SDRAM dual inline memory modules (DIMM).
Video memory      Installed: 2 MB of video memory.
PCI bus           Four PCI expansion slots for add-in boards (one slot shared with an ISA slot).
                  1x32 bit PCI bus. Embedded devices: video controller, Network Interface
                  Controller (NIC), and SCSI controller.
ISA bus           Two ISA expansion slots for add-in boards (one slot shared with a PCI slot).
                  Embedded PC-compatible support (serial, parallel, mouse, keyboard, diskette,
                  and Plug and Play features).
Server Management Thermal/voltage monitoring and error handling.
                  Real-time clock/calendar (RTC).
                  Front panel controls and indicators (LEDs).
                  System Setup Utility (SSU).
                  Basic Input/Output System (BIOS), Power On Self Test (POST), and Setup
                  stored in flash memory.
Graphics          Integrated onboard Cirrus Logic CL-GD5480 super video graphics array (SVGA)
                  controller.
                  Symbios† SYM53C876 dual function controller providing ultra wide and legacy
SCSI
                  narrow SCSI interfaces.
Network           Integrated onboard NIC, an Intel 82558 PCI LAN controller for 10 or 100 Mbps
                  TX Fast Ethernet† networks. RJ-45 Ethernet connector and indicator LEDs at
                  I/O back panel.
                  PS/2†-compatible keyboard and mouse ports, 6-pin DIN.
System I/O
                  Advanced parallel port, supporting Enhanced Parallel Port (EPP) level 1.7 and
                  1.9, ECP, compatible 25-pin.
                  VGA† video port,15-pin.
                  Two serial ports, 9-pin (serial port B is connected from the 10 pin header on the
                  server board to the back panel via a provided ribbon cable).
                  Network: RJ-45 Ethernet port.
                  Server AT† form-factor, 12 u 13 inches, ATX 2.01 compliant I/O.
Form Factor

]# kudzu -p | grep desc:
desc: "Intel Corporation 82371AB/EB/MB PIIX4 ACPI"
desc: "Intel Corporation 82371AB/EB/MB PIIX4 ISA"
desc: "Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled)"
desc: "PNP0201"
desc: "PNP0303"
desc: "PNP0401"
desc: "PNP0501"
desc: "PNP0501"
desc: "PNP0700"
desc: "PNP0800"
desc: "PNP0a03"
desc: "PNP0b00"
desc: "PNP0c02"
desc: "PNP0c04"
desc: "PNP0f13"
desc: "Intel Corporation 82557/8/9 [Ethernet Pro 100]"
desc: "LSI Logic / Symbios Logic 53c875"
desc: "LSI Logic / Symbios Logic 53c875"
desc: "Cirrus Logic GD 5480"
desc: "Intel Corporation 82371AB/EB/MB PIIX4 USB"
desc: "Intel Corporation 82371AB/EB/MB PIIX4 IDE"

žádný, vše funguje jak má, aspoň co jsem zkoušel ;)

IDE a SCSI řadiče jsou nestabilní. Interní Grafika jak by smet... Takže jak IDE, tak SCSI řadiče pro hlavní jednotky použité v PCI. Grafika v PCI. Jinak mi beži na Fedore 6 s posledními 2.6 jádry. Podpora starších jader by neměl být problém. Velmi kvalitní stroj pro domácí servery