faha

Dobry den, nedari se mi zprovoznit DVB-T USB DONGLE MSI Digivox mini II V3 ma jen drobnou odchylku vetsina techto donglu co jsem videl na netu je bila, avsak ja mam cernou. (zde vidim kamen urazu asi bude nepatrne odlisny)

(http://www.abclinuxu.cz/hardware/pridavne-karty/televizni-karty/dvb-t/usb/msi-digivox-mini-ii-v3.0)

Pouzil jsem dostupne navody,modul jsem zkompiloval a zavedl. Problem vidim v odlisnosti cerne varianty od bile.

Dongle se neidentifikuje jak by mel v lsusb.

<pre>

Bus 002 Device 016: ID 1d19:1101
Device Descriptor:
bLength                18
bDescriptorType         1
bcdUSB               2.00
bDeviceClass            0 (Defined at Interface level)
bDeviceSubClass         0
bDeviceProtocol         0
bMaxPacketSize0        64
idVendor           0x1d19
idProduct          0x1101
bcdDevice            1.00
iManufacturer           1 Realtek
iProduct                2 Rtl2832UDVB
iSerial                 0
bNumConfigurations      1
Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          4 USB2.0-Bulk&Iso
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 Bulk-In, Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81 EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200 1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 Bulk-In, Interface

Device Qualifier (for other device speed):
bLength                10
bDescriptorType         6
bcdUSB               2.00
bDeviceClass            0 (Defined at Interface level)
bDeviceSubClass         0
bDeviceProtocol         0
bMaxPacketSize0        64
bNumConfigurations      2
Device Status:     0x0000
(Bus Powered)
</pre>

V dmesg po pripojeni nevidim nic, je ze zaregistroval nove usb zarizeni

<pre>

[ 3053.447578] usb 2-6: new high speed USB device using ehci_hcd and address 16
[ 3053.588814] usb 2-6: configuration #1 chosen from 1 choice

</pre>

Jinak zkouseno ve Windows a zde zarizeni funguje bez problemu.

Nenarazil nekdo na stejny problem???

Dotaz: faha

Odpovědi