Dotaz: LaserJet 6L - problem s tlacou cez usb paraller adapter

[Stehlo]

Zdravim,
je mozne tlacit cez usb-paraller redukciu na tlaciarni HP laserjet 6L?
Snazim sa to nejak pridat, rozbehat ale nedari sa, rospoznane zariadenie:

dmesg
[ 9000.065141] usb 6-1: new full speed USB device using uhci_hcd and address 3
[ 9000.271756] usb 6-1: New USB device found, idVendor=067b, idProduct=2305
[ 9000.271763] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9000.271769] usb 6-1: Product: IEEE-1284 Controller
[ 9000.271772] usb 6-1: Manufacturer: Prolific Technology Inc.
[ 9000.271924] usb 6-1: configuration #1 chosen from 1 choice
[ 9000.281063] usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 9000.314746] usblp0: nonzero read bulk status received: -84

lsusb
Bus 006 Device 003: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port

a zariadenie udev:
/dev/usb/lp0

Co s tym dalej? aky URI pripadne ako teda spustit tuto tlaciaren?
cez CUPS mi nerospozna ziadne zariadenie usblp.

Odpovědi

[Franta Hanzlik]

Problém vidím v té chybové hlášce "nonzero read bulk status received" - může jít o nekompatibilitu HW, problém jádra,... Zkusil bych ji hodit do googlu.

[geolog]

grep -r usblp /etc/modules /etc/modprobe.d/