Portál AbcLinuxu, 12. května 2025 13:04
w_scan -f t -c CZ -X > channel.conf w_scan version 20090808 (compiled for DVB API 5.0) using settings for CZECH REPUBLIC DVB aerial DVB-T Europe frontend_type DVB-T, channellist 4 output format czap/tzap/szap/xine Info: using DVB adapter auto detection. /dev/dvb/adapter0/frontend0 -> DVB-T "Realtek RTL2832 DVB-T RTL2836 DTMB": good/dev/dvb/adapter1/frontend0 -> DVB-T "Realtek RTL2832 DVB-T RTL2836 DTMB": good
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0) -_-_-_-_ Getting frontend capabilities-_-_-_-_ Using DVB API 5.1 frontend Realtek RTL2832 DVB-T RTL2836 DTMB supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ Scanning 7MHz frequencies... 177500: (time: 00:01) set_frontend:1690: FATAL: unsupported DVB API Version 5.1
dmesg [ 17.467653] dvb-usb: found a 'USB DVB-T Device' in warm state. [ 17.467661] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 17.493005] DVB: registering new adapter (USB DVB-T Device) [ 17.493341] DVB: registering adapter 0 frontend 0 (Realtek RTL2832 DVB-T RTL2836 DTMB)... [ 17.493369] dvb-usb: USB DVB-T Device successfully initialized and connected. [ 17.493386] dvb-usb: found a 'USB DVB-T Device' in warm state. [ 17.493392] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 17.495526] DVB: registering new adapter (USB DVB-T Device) [ 17.495836] DVB: registering adapter 1 frontend 0 (Realtek RTL2832 DVB-T RTL2836 DTMB)... [ 17.495865] dvb-usb: USB DVB-T Device successfully initialized and connected.
lsusb Bus 001 Device 003: ID 1f4d:b803Dik za pomoc
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.