Portál AbcLinuxu, 9. května 2025 06:31
lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 1c4f:0002 SiGma Micro Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 04a9:1717 Canon, Inc. MP510 Bus 001 Device 003: ID 0413:6a03 Leadtek Research, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg [28651.840050] usb 1-4: new high speed USB device using ehci_hcd and address 7 [28651.982364] usb 1-4: configuration #1 chosen from 1 choice
Řešení dotazu:
Jul 24 01:45:08 doma kernel: [ 238.812021] usb 1-4: new high speed USB device using ehci_hcd and address 4 Jul 24 01:45:09 doma kernel: [ 238.955020] usb 1-4: configuration #1 chosen from 1 choiceaj keď lsmod vypíše:
Module Size Used by dvb_usb_rtl2832u 84005 0 dvb_usb 17599 1 dvb_usb_rtl2832u dvb_core 85978 1 dvb_usbsamozrejme ani kaffeine, ani me-tv zariadenie nenájdu. Neviem, či to nemá nejaký súvis s tým, že tieto karty sa vyrábajú v dvoch prevedeniach, jedna (zelená) pre M$ Woknus XP a druhá (orandžová - ktorú mám ja) pre M$ Woknus 7, ale obe majú švába rtl 2832u. :-| Ďakujem petrotomasy -mu i každému za radu
for information...i have the same dongle (LeadTek WinFast DTV Dongle Mini - Bus 001 Device 003: ID 0413:6a03 Leadtek Research, Inc. ) and after compiled RTL2832U + change VID+PID in rtl2832u.h (i changed USB_VID_GTEK + USB_PID_GTEK_WARM to leadtek`s 0413:6a03) is tuner working! (me-tv + kaffeine)Potom by mal dmesg vyzerať asi takto nejak, popíš ako si kompiloval ten modul.
[54444.033094] usb 1-2: new high speed USB device using ehci_hcd and address 3 [54444.174858] usb 1-2: configuration #1 chosen from 1 choice [54444.287045] dvb-usb: found a 'RT DTV 2832U' in warm state. [54444.287056] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [54444.288707] DVB: registering new adapter (RT DTV 2832U) [54444.289274] DVB: registering adapter 0 frontend 0 (Realtek RTL2832 DVB-T)... [54444.289324] dvb-usb: RT DTV 2832U successfully initialized and connected. [54444.289360] usbcore: registered new interface driver dvb_usb_rtl2832u
sudo apt-get install unrar build-essential mercurial
mkdir digivox; cd digivox
hg clone http://linuxtv.org/hg/v4l-dvb
wget http://media.ubuntuusers.de/forum/attachments/2103272/090730_RTL2832U_LINUX_Ver1.1.rar
unrar x -ep 090730_RTL2832U_LINUX_Ver1.1.rar ./v4l-dvb/linux/drivers/media/dvb/dvb-usb
cd v4l-dvb
for i in `find . -name *.pl`; do chmod +x $i ; done
emacs ./linux/drivers/media/dvb/dvb-usb/Makefile
(Insertion nearly to the end of file:)
dvb-usb-rtl2832u-objs = demod_rtl2832.o dvbt_demod_base.o dvbt_nim_base.o foundation.o math_mpi.o nim_rtl2832_mxl5007t.o nim_rtl2832_fc2580.o nim_rtl2832_mt2266.o rtl2832u.o rtl2832u_fe.o rtl2832u_io.o tuner_mxl5007t.o tuner_fc2580.o tuner_mt2266.o tuner_tua9001.o nim_rtl2832_tua9001.o
obj-$(CONFIG_DVB_USB_RTL2832U) += dvb-usb-rtl2832u.o
emacs ./linux/drivers/media/dvb/dvb-usb/Kconfig
(Insertion to the end of file:)
config DVB_USB_RTL2832U
tristate "Realtek RTL2832U DVB-T USB2.0 support"
depends on DVB_USB
help
Realtek RTL2832U DVB-T driver
emacs ./linux/drivers/media/dvb/dvb-usb/rtl2832u.c
(1. Remove // of line 12:)
//DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
(2. replace line 61-63 by:)
if ( ( 0== dvb_usb_device_init(intf,&rtl2832u_1st_properties,THIS_MODULE,NULL,adapter_nr) )||
( 0== dvb_usb_device_init(intf,&rtl2832u_2nd_properties,THIS_MODULE,NULL,adapter_nr) ) ||
( 0== dvb_usb_device_init(intf,&rtl2832u_3th_properties,THIS_MODULE,NULL,adapter_nr) ))
emacs ./linux/drivers/media/dvb/dvb-usb/tuner_tua9001.c
(search for 19.2 AND 20.48 and replace it by 19_2 AND 20_48:)
#elif defined(CRYSTAL_19.2_MHZ) /* Frequency 19.2 MHz */
#elif defined(CRYSTAL_19_2_MHZ) /* Frequency 19.2 MHz */
#elif defined(CRYSTAL_20.48_MHZ) /* Frequency 20,48 MHz */
#elif defined(CRYSTAL_20_48_MHZ) /* Frequency 20,48 MHz */
make
STRG^C after some secs.
emacs ./v4l/.config
(replace FIREDTV=m by FIREDTV=n:)
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV=n
make clean
make
sudo make install
#define USB_VID_GTEK 0x1F4D #define USB_PID_GTEK_WARM 0x0837mám prepísať na:
#define USB_VID_GTEK 0413:6a03 #define USB_PID_GTEK_WARM 0413:6a03no a žial, ani to nezafungovalo, keď som zadal iba príkaz sudo make install, tak kompilácia prebehla, ale nič sa nezmenilo, a keď som zadal make clean a následne make, tak to skončilo chybou:
/home/doma/digivox/v4l-dvb/v4l/dvb-usb-ids.h:67:1: warning: this is the location of the previous definition /home/doma/digivox/v4l-dvb/v4l/rtl2832u.c:86: error: expected ')' before ':' token /home/doma/digivox/v4l-dvb/v4l/rtl2832u.c:86:46: error: invalid suffix "a03" on integer constant /home/doma/digivox/v4l-dvb/v4l/rtl2832u.c:86: error: expected ')' before ':' token /home/doma/digivox/v4l-dvb/v4l/rtl2832u.c:86:46: error: invalid suffix "a03" on integer constant make[3]: *** [/home/doma/digivox/v4l-dvb/v4l/rtl2832u.o] Error 1 make[2]: *** [_module_/home/doma/digivox/v4l-dvb/v4l] Error 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-24-generic' make[1]: *** [default] Chyba 2 make[1]: Leaving directory `/home/doma/digivox/v4l-dvb/v4l' make: *** [all] Chyba 2
#define USB_VID_GTEK 0x0413 #define USB_PID_GTEK_WARM 0x6a03
ďakujem veľmi pekne
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.