Portál AbcLinuxu, 6. května 2025 11:51
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-1ER164 Serial Number: Z4Z69102 LU WWN Device Id: 5 000c50 09272495c Firmware Version: CC26 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Aug 16 12:51:53 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 80) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 209) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 112 096 006 Pre-fail Always - 45408576 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 53 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 195512513 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15404 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 602 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10 190 Airflow_Temperature_Cel 0x0022 064 060 045 Old_age Always - 36 (Min/Max 24/39) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 096 096 000 Old_age Always - 8923 194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 17 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 15374h+05m+55.238s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 260604770878 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 11911018167669 SMART Error Log Version: 1 ATA Error Count: 602 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 602 occurred at disk power-on lifetime: 15393 hours (641 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 10 f8 c7 c8 40 00 25d+13:49:04.104 READ FPDMA QUEUED 60 00 08 e0 c7 c8 40 00 25d+13:49:04.104 READ FPDMA QUEUED 60 00 08 c0 c7 c8 40 00 25d+13:49:04.104 READ FPDMA QUEUED 60 00 08 a8 c7 c8 40 00 25d+13:49:04.103 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 25d+13:49:04.103 READ FPDMA QUEUED Error 601 occurred at disk power-on lifetime: 15393 hours (641 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 ff ff ff 4f 00 25d+13:49:00.379 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 25d+13:49:00.358 READ FPDMA QUEUED 60 00 08 70 9a 1b 44 00 25d+13:49:00.357 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 25d+13:49:00.344 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 00 25d+13:49:00.344 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 600 occurred at disk power-on lifetime: 15393 hours (641 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 ff ff ff 4f 00 25d+13:48:56.643 READ FPDMA QUEUED 60 00 08 70 9a 1b 44 00 25d+13:48:56.642 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 25d+13:48:56.642 READ FPDMA QUEUED 60 00 08 08 eb 1c 44 00 25d+13:48:56.642 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 25d+13:48:56.628 READ FPDMA QUEUED Error 599 occurred at disk power-on lifetime: 15393 hours (641 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 50 ff ff ff 4f 00 25d+13:48:52.656 READ FPDMA QUEUED 60 00 10 ff ff ff 4f 00 25d+13:48:52.655 READ FPDMA QUEUED 60 00 08 d8 6a 20 41 00 25d+13:48:52.467 READ FPDMA QUEUED 60 00 38 88 6a 20 41 00 25d+13:48:52.467 READ FPDMA QUEUED 60 00 08 70 6a 20 41 00 25d+13:48:52.467 READ FPDMA QUEUED Error 598 occurred at disk power-on lifetime: 15368 hours (640 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 ff ff ff 4f 00 24d+12:29:44.678 READ FPDMA QUEUED 60 00 08 c0 1d e9 42 00 24d+12:29:44.660 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 24d+12:29:44.648 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 00 24d+12:29:44.648 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 24d+12:29:44.647 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 15404 2779841232 # 2 Short offline Completed: read failure 60% 15404 2779841232 # 3 Extended offline Completed: read failure 90% 13336 2779841232 # 4 Short offline Completed: read failure 90% 13336 2779841232 # 5 Short offline Completed: read failure 90% 12376 2779841232 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Řešení dotazu:
# 3 Extended offline Completed: read failureJe tam hromada chyb čtení a má 8
Offline_Uncorrectable
sektorů. Prostě je kaput.
badblocks -wvs -b 4096 -c 4096 /dev/sdx
někdy se ty vadný sektory přealokují a jde používat s obezřetností trochu déle
Error 602 occurred at disk power-on lifetime: 15393 hours (641 days + 9 hours)Zazálohovat a reklamovat.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.