Dotaz: Blbne mi touchpad

[Michal]

Nazdar, ted me asi budete chtit ukamenovat, ale ja si uz opravdu nevim rady, prosel jsem snad cely ABClinux a hledal jsem jak tenhle problem vyresit. Navodu je tu dost, ale ani jeden mi nepomohl.

Problem je tedy klasicky : mam notebook s MDK 10.1 s mysi Genius Netscroll+, kdyz nemam pripojenou mys, tak mi touchpad funguje skvele. Kdy mys pripojim, tak mys funguje bez problemu, ale blbne i touchpad.

Zkousel jsem ruzne nastaveni konfiguracniho souboru a ani jedno nepomohlo. Ted mam nastaveny toto(to taky nefunguje a uz nevim jak dal :( )

Section "InputDevice" 
Identifier "Mouse0" 
Driver "mouse" 
Option "Device" "/dev/mouse" 
Option "Protocol" "PS/2" 
Option "Emulate3Buttons" "off" 
Option "ZAxisMapping" "4 5" 
EndSection 

Section "InputDevice" 
Identifier "Mouse1" 
Driver "mouse" 
Option "Device" "/dev/input/mice" 
Option "Protocol" "IMPS/2" 
Option "Emulate3Buttons" "off" 
Option "ZAxisMapping" "4 5" 
EndSection 

Section "ServerLayout" 
Identifier "XFree86 Configured" 
Screen 0 "Screen0" 0 0 
InputDevice "Mouse0" "CorePointer" 
InputDevice "Keyboard0" "CoreKeyboard" 
EndSection

PS: pokud jsem nekde neco prehlidnul, omlouvam se

Odpovědi

[Josef Kufner]

Bud pouzivej /dev/input/mice nebo ty ostatni, ale nemichej to dohromady. Pak prichazeji eventy od jednoho zarizeni dvakrat.

[Josef Kufner]

A příště použij <pre>

[Michal]

jj omlouvam se to mi nedoslo

stejne mi to nefunguje i kdyz pouziam jen jedno :(

[Josef Kufner]

Aaaa... <pre> jenom na ty konfiguraky, ne na cely prispevek!

[Leoš Literák]

opraveno PRE.

Ja mam v konfigu tohle a funguje mi mys, touchpad i stickpoint.

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "6 7"
EndSection

Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "EdgeMotionMinSpeed" "200"
    Option "MinSpeed" "0.8"
    Option "MaxSpeed" "1.00"
    Option "BottomEdge" "650"
    Option "EdgeMotionMaxSpeed" "200"
    Option "UpDownScrolling" "0"
    Option "CircScrollTrigger" "2"
    Option "SHMConfig" "on"
    Option "EmulateMidButtonTime" "75"
    Option "CircScrollDelta" "0.1"
    Option "LeftEdge" "120"
    Option "FingerLow" "14"
    Option "HorizScrollDelta" "20"
    Option "MaxTapMove" "110"
    Option "MaxTapTime" "180"
    Option "FingerHigh" "15"
    Option "VertScrollDelta" "20"
    Option "CircularScrolling" "1"
    Option "AccelFactor" "0.015"
    Option "RightEdge" "830"
    Option "TopEdge" "120"
EndSection

Je to generovany konfig z Mandrivy 2006 RC1.