Portál AbcLinuxu, 9. června 2025 00:21
#dmesg usbcore: registered new driver usbfs usbcore: registered new driver hub CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 23 nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 IrCOMM protocol (Dag Brattli) PCI: Found IRQ 11 for device 0000:00:02.0 IRQ routing conflict for 0000:00:06.0, have irq 9, want irq 11 PCI: Sharing IRQ 11 with 0000:01:00.0 Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 PCI: Found IRQ 11 for device 0000:00:02.1 Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000010 cs: IO port probe 0x300-0x3ff: excluding 0x330-0x337 0x388-0x38f Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0x40000000 cs: IO port probe 0x300-0x3ff: excluding 0x330-0x337 0x388-0x38f cs: memory probe 0x60000000-0x60ffffff: clean. eth0: Xircom: port 0x300, irq 7, hwaddr 00:10:A4:EC:6D:D6 USB Universal Host Controller Interface driver v2.3 PCI: Found IRQ 11 for device 0000:00:07.2 uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
#lsmod Module Size Used by ppp_deflate 5248 0 zlib_deflate 23704 1 ppp_deflate ppp_async 9984 1 ehci_hcd 32904 0 ohci_hcd 20100 0 uhci_hcd 32144 0 intel_agp 21404 1 agpgart 30032 1 intel_agp yenta_socket 23436 4 rsrc_nonstatic 12416 1 yenta_socket ircomm_tty 22408 2 ircomm 11908 1 ircomm_tty nsc_ircc 15420 0 irda 128440 3 ircomm_tty,ircomm,nsc_ircc crc_ccitt 2176 2 ppp_async,irda snd_cs4236 14148 4 snd_opl3_lib 9728 1 snd_cs4236 snd_hwdep 7712 1 snd_opl3_lib snd_cs4236_lib 15360 1 snd_cs4236 snd_mpu401_uart 6656 1 snd_cs4236 snd_rawmidi 21152 1 snd_mpu401_uart snd_seq_device 7436 2 snd_opl3_lib,snd_rawmidi snd_cs4231_lib 23936 2 snd_cs4236,snd_cs4236_lib snd_pcm_oss 50976 0 snd_mixer_oss 18176 2 snd_pcm_oss snd_pcm 84612 4 snd_cs4236_lib,snd_cs4231_lib,snd_pcm_oss snd_timer 22532 3 snd_opl3_lib,snd_cs4231_lib,snd_pcm snd 48996 17 snd_cs4236,snd_opl3_lib,snd_hwdep,snd_cs4236_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_cs4231_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 7904 2 snd snd_page_alloc 8840 2 snd_cs4231_lib,snd_pcm xirc2ps_cs 18320 1 pcmcia 33064 1 xirc2ps_cs pcmcia_core 37656 3 yenta_socket,rsrc_nonstatic,pcmcia ppp_generic 27540 6 ppp_deflate,ppp_async slhc 6656 1 ppp_generic usbcore 114172 4 ehci_hcd,ohci_hcd,uhci_hcd
#cat /proc/interrupts
CPU0
0: 239731 XT-PIC timer
1: 1540 XT-PIC i8042
2: 0 XT-PIC cascade
3: 40122 XT-PIC irda0
5: 12824 XT-PIC CS4231
7: 4 XT-PIC 1.0
9: 98 XT-PIC acpi
11: 2 XT-PIC yenta, yenta, uhci_hcd:usb1
12: 36842 XT-PIC i8042
14: 5784 XT-PIC ide0
15: 34 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
kde 1.0 na sedmicke je eth0
#pccardctl ident Socket 0: no product info available Socket 1: product info: "Xircom", "CreditCard 10/100", "CE3-10/100", "1.00" manfid: 0x0105, 0x010a function: 6 (network)no a teraz k problemu pri bootovani sa mi nespusta interface eth0 pouzivam pri bootovani network-profiles, kde mam nadefinovane interface ked spustim profile s eth0 napise mi ze eth0 no such device unknown device, cize vlastne ako keby sietovka este nebezala no ale ako vidiet hore sietovka bezi (teda ked uz som v xkach) a ked zadam /etc/rc.d/network restart a vyberiem profil pre eth0 vsetko nabehne v poriadku aj ked dam ifconfig eth0 up tak sa interface eth0 spusti cize problem je v tom, ze pocas bootovania ako keby sa nespustila este predtym, nez sa vybera ten sietovy profil pri pouzivani pcmacia-cs to bezalo este podotykam, ze momentalne nemam /etc/conf.d/ subor pcmcia, ktory som tam mal, ked som pouzival pcmcia-cs, neviem, ci ho tam treba, ale ako som cital, tak asi ani nie neviem, ci treba nieco pripisat do /etc/modprobe.conf ako trebars alias eth0 alebo nieco, aby sa sietovka spustala hned pri boote ak mi viete poradit budem vdacny za vsetky podnety.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.