Dotaz: NTB Debian GPRS konexe pres bluetooth a HP Ipaq hw 6510

[Filip Huska]

Dobry den, chtel bych se pripojit se svym notasem pres HP iPAQ hw 6510 k internetu, jak jsem zvyklej z Nokie pres bluetooth.

Na iPAQu je nastaveni poveleno i sdileni modemu.
Na linuxu :
manicka:/etc# cat /etc/bluetooth/rfcomm.conf
#
# RFCOMM configuration file.
#

rfcomm0 {
# Automatically bind the device at startup
bind yes;
# Bluetooth address of the device
device 00:09:2D:56:6F:CF;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "HP Jornada hw 6500";
}

manicka:/etc# l2ping 00:09:2D:56:6F:CF
Ping: 00:09:2D:56:6F:CF from 00:16:41:05:F7:E5 (data size 44) ...
44 bytes from 00:09:2D:56:6F:CF id 0 time 77.83ms
44 bytes from 00:09:2D:56:6F:CF id 1 time 17.94ms
2 sent, 2 received, 0% loss

manicka:/etc# cat /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/rfcomm0
Baud = 115200
Init1 = ATZ
#Init2 = AT&K4 X1
Init1 = AT+CGDCONT=1,"IP","internet"
ISDN = 0
Modem Type = Analog Modem
Carrier Check = no
Phone = atdt*99***1#
# *99# pouze pro nokia telefony
Username = ""
Password = ""
New PPPD = yes

manicka:/etc# wvdial
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: AT+CGDCONT=1,"IP","internet"
--> Sending: ATQ0
--> Re-Sending: AT+CGDCONT=1,"IP","internet"
--> Modem not responding.


Netusite nahodou, jake inicializacni prikazy jsou pro iPAQ ? Myslim, ze v tom je problem.
Diky..

Odpovědi

[kozzi]

Init1 = AT+CGDCONT=1,"IP","internet"

nemelo by tam byt Init2 = AT+CGDCONT=1,"IP","internet"

[Filip Huska]

Ano, to uz byl prepis v ramci testovani, puvodne to byl Init3. Kazdopadne na funkci zivocichare to nemelo vliv. f.

[Rexxor]

Vyresil jsem. http://www.abclinuxu.cz/hardware/show/131076