gentoo & ivman - zadna odezva

Ahojte,

potrebuji poradit s jednim problemem. Nedavno jsem nainstaloval gentoo a podle navodu na wiki ivman, hald, a dbus (bohuzel ted nevim verze, ale kdyz tak je dopisu). Automaticke pripojovani mi fungovalo, ale jenom nejaky cas, najednou to behat prestalo. Zjistil jsem nasledujici:

rucni pripojeni (mount /dev/....) usb zarizeni funguje bez problemu
d-bus i hald bezi.
kdyz jsem spustil hald v debug a verbose modu (ne daemon) spravne vypisuje ze detekoval nove pripojene zarizeni. Stejne tak kdyz USB vytahnu.
kdyz spustim ivman v debug rezimu (jako "obyc" uzivatel), napise jaky prikaz pouzije pro mount a pak "entering main loop", nicmene po zasunuti USB zadna reakce, zadny vypis. Jako by od hald nedostal zadnou zpravu (primo nebo pres d-bus??).

Pokud nebezi hald, vypise ivman rovnou chybu, takze se zda ze by melo vsechno fungovat, ale ve skutecnosti mrtvo. Bohuzel nevim, od ceho se odrazit ....

Napada vas neco? Muze byt nejaka chyba v ~/.ivman/... konfiguraci? Nebo neco zavaznejsiho? Budu vdecny za jakoukoli napovedu nebo pomoc ...

Diky mco vsem, D.

P.S. Budete-li chtit, prilozim presne vypisy (momentalne tady nemam svuj pocitac)

Jeste pridavam vypisy: Spusteni hald (verze 0.5.5.1): # hald --daemon=no --verbose=yes

11778: 16:24:19.969: addon-acpi.c:78: Cannot connect to acpid socket: No such file or directory
16:24:24.756 [I] osspec.c:237: bytes_read=166 buf='add@/devices/pci0000:00/0000:00:1d.7/usb1/1-4'
16:24:24.756 [I] osspec.c:237: bytes_read=295 buf='add@/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0'
16:24:24.756 [I] osspec.c:237: bytes_read=169 buf='add@/class/scsi_host/host2'
16:24:24.756 [I] osspec.c:237: bytes_read=217 buf='add@/class/usb_device/usbdev1.3'
11778: 16:24:24.969: addon-acpi.c:78: Cannot connect to acpid socket: No such file or directory
16:24:29.755 [I] osspec.c:237: bytes_read=218 buf='add@/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host2/target2:0:0/2:0:0:0'
16:24:29.757 [I] osspec.c:237: bytes_read=211 buf='add@/block/sdb'
16:24:29.760 [I] osspec.c:237: bytes_read=221 buf='add@/block/sdb/sdb1'
16:24:29.761 [I] osspec.c:237: bytes_read=232 buf='add@/class/scsi_device/2:0:0:0'
16:24:29.761 [I] osspec.c:237: bytes_read=244 buf='add@/class/scsi_generic/sg1'
11778: 16:24:29.974: addon-acpi.c:78: Cannot connect to acpid socket: No such file or directory
11778: 16:24:34.978: addon-acpi.c:78: Cannot connect to acpid socket: No such file or directory
16:24:39.001 [I] osspec.c:237: bytes_read=250 buf='remove@/class/scsi_generic/sg1'
16:24:39.001 [I] osspec.c:237: bytes_read=238 buf='remove@/class/scsi_device/2:0:0:0'
16:24:39.001 [I] osspec.c:237: bytes_read=227 buf='remove@/block/sdb/sdb1'
16:24:39.001 [I] osspec.c:237: bytes_read=217 buf='remove@/block/sdb'
16:24:39.001 [I] osspec.c:237: bytes_read=224 buf='remove@/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host2/target2:0:0/2:0:0:0'
16:24:39.001 [I] osspec.c:237: bytes_read=175 buf='remove@/class/scsi_host/host2'
16:24:39.001 [I] osspec.c:237: bytes_read=301 buf='remove@/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0'
16:24:39.001 [I] osspec.c:237: bytes_read=223 buf='remove@/class/usb_device/usbdev1.3'
16:24:39.001 [I] osspec.c:237: bytes_read=154 buf='remove@/devices/pci0000:00/0000:00:1d.7/usb1/1-4'
11778: 16:24:39.978: addon-acpi.c:78: Cannot connect to acpid socket: No such file or directory

Jak je videt, po pripojeni USB flash disku a jeho opetovnem odpojeni hald reaguje jak ma. Predpokladam, ze chyba addon-acpi nema s timto problemem nic spolecneho, pripojovani zarizeni by stad mel delat hald-addon-storage (nebo se pletu?).
po spusteni ivman (verze 0.6.8): ~$ ivman -d --nofork

manager.c:1334 (do_startup_configure) Directory /home/dtihelka/.ivman/ will be used for configuration files.
manager.c:257 (set_mount_command) No mount command was specified in IvmConfigBase.xml.  Ivman will try to automatically detect the command to use. If Ivman incorrectly detects the program(s) available on your system, first make sure the program(s) are in the default shell PATH, then please report it as a bug.
manager.c:278 (set_mount_command) pmount-hal was found on your system. It will be used for mounting.
manager.c:1383 (main) ivman 0.6.8, http:/ivman.sourceforge.net
manager.c:1388 (main) Compiled against HAL 0.5.x or later
manager.c:1395 (main) Running in user mode.
manager.c:1426 (main) Entering main loop.

a dal vubec nic i kdyz jsem nekolikrat vlozit a vysunul USB flash disk. Stejne tak se nic nedeje, kdyz spustim ivman jako root (pres /etc/initd/ivman start) Any ideas? Jsem z toho zoufaly, nemam se ceho chytit. Jedine co me napada je spatny konfiguracni soubor .....

Jo a jeste jedna vec. Ted jsem si vsiml, ze # lshal | grep block.device NEVYPISE /dev/sdb ani /dev/sdb1 i kdyz mam USB flash zastrceny. mount /dev/sdb1 /mnt/usb funguje bez problemu.

Takze ze by prece jen problem s hald??? Diky, Dan

Dotaz: gentoo & ivman - zadna odezva

Odpovědi