Portál AbcLinuxu, 10. května 2025 11:10

Dotaz: Nefunkční XGL - openSuSE 10.2 - ovladače OK (ATI MobilityRadeon X1400)

7.2.2007 23:09 JIP.XF.cz
Nefunkční XGL - openSuSE 10.2 - ovladače OK (ATI MobilityRadeon X1400)
Přečteno: 310×
Odpovědět | Admin
Dle oficiálního návodu na How to install ATI 3D support jsem si úspěšně nainstaloval ovladače grafiky.

# fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon X1400 Generic
OpenGL version string: 2.0.6286 (8.33.6)


Také na příkaz:
fgl_glxgears – testovací kostka bez problémů.

Ale v „Nastavení efektů plochy“ mám stále:

Grafická karta: Neznámé, Vaše grafická karta není v databázi Xgl.
3D akcelerace: Zakázáno, Efekty plochy: Zakázáno

Prosím poraďte jak bych měl pokračovat, aby mi fungovala 3D plocha?
_____________________________ Ubuntu 6.06 LTS, openSUSE 10.2, http://www.jip.xf.cz/
Nástroje: Začni sledovat (2) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

8.2.2007 09:24 kerala
Rozbalit Rozbalit vše Re: Nefunkční XGL - openSuSE 10.2 - ovladače OK (ATI MobilityRadeon X1400)
Odpovědět | | Sbalit | Link | Blokovat | Admin
tento šlendrián je způsoben výrobcem ovladačů, ovladače od nVidie jsou OK. Jinak, pro spuštění 3D deskopu je třeba doplnit "xorg.conf" a provést příkaz "gnome-xgl-switch --enable-xgl". Podrobněji je to popsané "http://www.suseportal.cz/forum/ati_a_xorg_7_2_v_opensuse_10_2".
8.2.2007 19:18 JIP.XF.cz
Rozbalit Rozbalit vše Re: Nefunkční XGL - openSuSE 10.2 - ovladače OK (ATI MobilityRadeon X1
Díky za odpověď. Vím, že nVidia je OK. Na druhém kompíku s nVidií NX7600GS jsem to měl bez problémů, ale v notebooku mám hold neprozřetelně ATI. Co teď nadělám...

Tak jsem tedy doplnil xorg.conf dle návodu, ale příkaz:

gnome-xgl-switch --enable-xgl

Vypíše jen tento text:

Can´t find the PID file in the configuration file, going to try:
/var/run/gdm.pid
/var/run/gdm.pid doesn´t exist, perhaps GDM isn´t running

Zřejmě chybí nějaký soubor... Jelikož podobný problém v mnou nalezených diskusích nikdo neřešil, tak zase nevím jak bych měl postupovat dále. Metodu pokus-omyl již aplikovat nechci. Už jsem to musel jednou reinstalovat znovu:(

Ještě výpis mého /etc/X11/xorg.conf (tučně je to nově přidáno)

# /.../ Section "Extensions"
Option "Composite" "0"
EndSection # SaX generated X11 config file
# Created on: 2007-02-07T22:17:17+0100.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [SaX2] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
FontPath "unix/:7100"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "IgnoreABI" "on"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "cz,us"
Option "XkbModel" "pc104"
Option "XkbOptions" "grp:shift_toggle"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "PS/2+USB Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[3]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "HorizScrollDelta" "0"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 331 207
HorizSync 30-62
Identifier "Monitor[0]"
ModelName "QUANTADISPLAY LCD MONITOR"
Option "DPMS"
VendorName "QDS"
VertRefresh 43-60
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
EndSection

Section "Device"
BoardName "Framebuffer Graphics"
BusID "1:0:0"
Driver "fglrx"
Identifier "Device[0]"
#Option "NoDDC"
Option "UseInternalAGPGART" "no"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000" Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "locked-userpages=0"
VendorName "VESA"
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Screen "Screen[0]"
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection


Section "DRI"
Group "video"
Mode 0660
EndSection
_____________________________ Ubuntu 6.06 LTS, openSUSE 10.2, http://www.jip.xf.cz/

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.