Hylafax, Eicon Diva direct inward dialing

Ahoj zkousim rozchodit Hylafax spolu s Diva Server BRI-2M 2.0 PCI. Vetsina veci mi funguje, ale nemuzu rozchodit rozpoznavani cisla na ktere ma fax putovat. Zkousel jsem zapnout rozpoznavani v Dive, ale pak mi nejdou prijimat faxy, ale posilat jdou.
Uz se s tim placam 14 dni a nemuzu na nic prijit.

Dik za pomoc
config.ttyds01

CountryCode: 420
AreaCode: 37
FAXNumber: +420.xx.xxx.xxxx
LongDistancePrefix: 420
InternationalPrefix: 420
DialStringRules: "etc/dialrules"
ServerTracing: 0xfff
SessionTracing: 0xfff
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 4
SpeakerVolume: off
GettyArgs: "-b -r -s %s %l"
LocalIdentifier: "NothingSetup"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25

ModemType: Class2
ModemRate: 33600
ModemFlowControl: rtscts
ModemNoFlowCmd: AT&K0
ModemSoftFlowCmd: AT&K4
ModemHardFlowCmd: AT&K3

Class2APQueryCmd: none
Class2SPLCmd: none
Class2TBCCmd: none
Class2ECMType: 2.0

ModemResetCmds: AT#CID=14+iQ=a1

CIDNumber: "DAD: "
CIDName: "CID: "
CallIDAnswerLength: 4

Dotaz: Hylafax, Eicon Diva direct inward dialing